Taking turbo off, need to know what size wrenches to have.

[S_Ranger]

I'm gonna take the stocker off as a complete assembly. Meaning just unscrewing the nuts from the manifold and nuts off the downpipe to 02.

I need to know what ppl from experience used to get those awkward nuts off the manifold, the bottom row I mean. What size wrench/socket am I going to need for that and the nuts off the downpipe/02?

I plan on using pb blaster maybe 2 nights before I do this.

Since I got your attention what size wrench/socket for the oil feed line fittings? List em all, you should know where I'm going with this.

 

[dsmpokolm]

Take everything out. Where the manifold meets the head. Doing this last of course. Take the bolts off where the O2 housing meets the downpipe. Common sizes are 10mm, 12mm and 14mm. Maybe some flare nut wrenches for those feed lines.

 

[S_Ranger]

Thankyou..

Am I gonna need an extension or a breaker pipe/bar?

 

[Heavy-D]

Don't forget a can of PB Blaster

 

[dsmpokolm]

Those are good things to have for a project like this.