ECMlink Stock DSM injector deadtimes

[Gsx_Parker]

So I had evo 8 injectors tuned to my car by english racing, I swapped them out for some 850cc injectors and now in the process of trying to set them up properly. They have been acting up and it is running rich. I've read about dsmers switching from evo 8 injectors and having the same problem, they fixed it by setting the injector deadtime voltage back to stock and other minor adjustments. What I can't find is the stock injector deadtime voltage, and since I didn't tune the evo 8 injectors myself I never saw what they were. Anyone know what I should set my voltage | usecs table in ecmlink at for 850cc or stock values?

 

[gdb1039]

Sad, I've seen you ask this question in two threads and no one is giving you the answer. I pulled an old log for you

7v 2295
9v 1260
12v 915
14v 690
16v 555
19v 495

Good luck with your tuning on those injectors. You will get it.

 

[gdb1039]

Those are the stock setting btw

 

[Gsx_Parker]

Hey thank you I appreciate it. I know no one wants to help the noobie but I’m young and trying to learn. Thank you.