1G Speed Density - Purchase and Installation

[CiscoBite1Time]

My 93 Talon is bone stock so I'm compiling a winter list of items I'd like to add to my 1G. SD is one of them.

Any one willing to share where they have their MAP sensor mounted under the hood? I have SD with Omni 3 bar on my 2G. This was installed maybe closer to 8-9 years ago.

I never knew until I started researching SD for 1G's that a lot of people have had OMNI fail on them so they moved to AEM. I think for simplicity I'm just going to order a OMNI 3 bar bundle and PNP cable from ExtremePSi.

 

[ItsTwan309]

My 93 talon is bone stock so I'm compiling a winter list of items I'd like to add to my 1G. SD is one of them. Any one willing to share where they have their MAP sensor mounted under the hood? I have SD with Omni 3 bar on my 2G. This was installed maybe closer to 8-9 years ago. I never knew until I started researching SD for 1G's that a lot of people have had OMNI fail on them so they moved to AEM. I think for simplicity I'm just going to order a OMNI 3 bar bundle and PNP cable from ExtremePSi.

Ive had omni for 4 years with no issues. I have mine installed on the fire wall behind the TB elbow and my IAT about 6" from TB

You must be logged in to view this image or video.

 

[steve]

Seriously, take a pass on the Omni MAP sensor.

Here is one solution for mounting the AEM.

2G - How To: Wiring & logging an AEM 3.5 bar MAP sensor with DSMLink

This is a write up on how to wire in a AEM 3.5bar MAP sensor in a 2g and log it using DSMLink V3. Since V3 is installed on your car its possible to remove your MDP (manifold differential pressure) sensor and in its place wire in a MAP sensor to log actual boost.If your still running the 2g...

www.dsmtuners.com