The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Resolved six bolt &7 bolt oil filter housing differance?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

boost1995

Probationary Member
22
0
May 29, 2011
wausau, Wisconsin
Ok so my oil filter housing cracked when i was puting my prosport oil sending unit in and i do not have another six bolt housing. I do however have a seven bolt housing and it appears like it will work but i want to double check with u guys before i go through the monatony of bolting it all back together just to find out it wont work.

Any feed back is appreciated. Thanks in advance.
 
Solution
The bolt patterns are different. The bottom two bolts on a 7-bolt are roughly 1.25 inches apart, center to center. The same bolts on a 6-bolt are roughly 1.875 inches apart.
The bolt patterns are different. The bottom two bolts on a 7-bolt are roughly 1.25 inches apart, center to center. The same bolts on a 6-bolt are roughly 1.875 inches apart.
 
Solution
Ok thanks guys. Guys i coulda just tried it and saw it didnt bolt up. They looked visually the same. I just tgought there may have been some internal diffrence

Ok well i went out and actually measured all the bolt holes with a caliper on both housings and they are exactly the same so then i bolted it on and the seven bolt fits perfect except for the hard oil lines seem to be tight on the block. Easy fix i believe. Ill post pics in a bit
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
  • Wanted WTB 2g half rad
    ISO of a 2g koyo half rad or something equivalent.
    • Michael Wucher
    • Updated:
    • Expires
  • For sale Coilover Springs
    Used pair of Eibach coilover springs from an old set of Ground Control coilovers. 2.5" inner...
    • RamenPride
    • Updated:
    • Expires
  • For sale 4G63 Mitsubishi logo early valve cover
    Early Mitsubishi logo valvecover. “1990” All threaded holes are good. Has the 90 style vent...
    • Galant665
    • Updated:
Back
Top