The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Should i paint my Carbon Fiber hood?

Paint Carbon Fiber Hood?

  • Paint

    Votes: 29 36.3%
  • don't paint

    Votes: 51 63.8%

  • Total voters
    80

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

so people can see the car
30753Picture_016.jpg
 
Normally the only ones that I like unpainted are Talons with the black top cause it flows so well..but in your case I'd leave it unpainted too.
 
That would be like paying paris hilton $1000 for a b/j and then putting a bag over her head. :nono: Leave it alone or go back to stock imo. :dsm:
 
BISHILVR said:
That would be like paying paris hilton $1000 for a b/j and then putting a bag over her head. :nono: Leave it alone or go back to stock imo. :dsm:

hahah great comparison...anyway in my opinion, i'd leave it the way it is.
 
BISHILVR said:
That would be like paying paris hilton $1000 for a b/j and then putting a bag over her head. :nono: Leave it alone or go back to stock imo. :dsm:
:notgood: That was a horrible comparison! The whole reason for carbon fiber is weight reduction, and that all it should be for. If you want the look of carbon fiber just get some vinal cut and put it on your car. Its just as ricey. Why advertise to you local car theifs any ways?
 
I myself would leave the carbon fiber the way it is. Ive seen a few people who have painted theirs, didnt look too bad. One of my buddies got his painted, and it felt really rough, like it was real grainy. But IMO id leave it the way it is.
 
BISHILVR said:
That would be like paying paris hilton $1000 for a b/j and then putting a bag over her head. :nono: Leave it alone or go back to stock imo. :dsm:
odd comparison.. the only way id take a BJ from paris hilton is if a bag WAS over her face :notgood:
 
The CF hood looks good, the headlights look ghetto IMO. The PS job confronts this problem. The "chrome" look on a red car with black/carbon accents doesn't flow. Save your money and get some less-cheap looking headlights. Oh... and drop your car.
 
Paint it. Like gst-spidey said get a candy paint so it colors but can still somewhat see the carbon fiber. Would look damn good.
 
Injected said:
The CF hood looks good, the headlights look ghetto IMO. The PS job confronts this problem. The "chrome" look on a red car with black/carbon accents doesn't flow. Save your money and get some less-cheap looking headlights. Oh... and drop your car.


Hes right but ! you do not need to sell the chrome ones. just take them apart ( theres a write up on it its super easy ) and then the "chrome" piece will come out paint it the color of the car or black like the hood or anything but chrome. good luck . :thumb:
 
CrazyUglyCoyote said:
:notgood: That was a horrible comparison! The whole reason for carbon fiber is weight reduction, and that all it should be for. If you want the look of carbon fiber just get some vinal cut and put it on your car. Its just as ricey. Why advertise to you local car theifs any ways?


no no no your completly wrong. ROFL

If I had a CF....id paint it to match the car. But then Id be buying it for weight reduction not to be like "yo dawg check my mad tight carbon fiba hood mang."
 
CrazyUglyCoyote said:
:notgood: That was a horrible comparison! The whole reason for carbon fiber is weight reduction, and that all it should be for. If you want the look of carbon fiber just get some vinal cut and put it on your car. Its just as ricey. Why advertise to you local car theifs any ways?
Dude get real, do you actually believe that ANYBODY buy's a carbon fiber hood JUST for weight reduction??? :rolleyes: . In a perfect f&f world yeah that would wash, but not in the real world my friend. Have you ever seen anybody run thier car in the quarter before with the stock hood and then switch to a cf hood and run again??? What do you really think the gain would be??? Honestly, i knew this arguement was gonna come up, i was JUST waiting for someone to chime in with the "weight savings only yo'". You know, it's funny the only people that want a carbon fiber hood painted is the people that cant afford one, or that have a cracked one and are jealous of the beauty of the good looking one's. If anybody's sole reason was to go with a carbon fiber hood was to run faster quarter times then that's a major waste of cabbage. For the money ($400-$700) i can think of much, much more that will actually give you a faster quarter time. Nitrous comes to mind, or how about a bigger turbo, some head work, etc. etc. :boring: :dsm:
 
CrazyUglyCoyote said:
:notgood: That was a horrible comparison! The whole reason for carbon fiber is weight reduction, and that all it should be for.

As noted above by BISHILVR, this argument just doesn't fly. The main fallacy is that if you are doing the CF for actual weight savings only, why add the extra weight of paint to the car (sarcasm :rolleyes: ). The reason people consider bare CF hoods ricey is that ricers, who emulate fast cars, put CF hoods on slow/show cars. WHO CARES? I don't think HKS was too concerned about appearing ricey when they made a near full carbon bodies EVO.

CrazyUglyCoyote said:
If you want the look of carbon fiber just get some vinal cut and put it on your car. Its just as ricey.

And he already has the CF hood! Jebus!
 
I already have a CF hod on my car, and it is painted to match the rest of my car. Leaving it unpianted in my opinion is just ricey. Doing everything you can to reduce weight will help your 1/4 time. My next plan is to replace the rear hatch w/ a carbon fiber frame, and Lexan.

P.S. You dont see all the cars in F-1, Indy, Le mans, and what not showing off their bling bling. Their driving skills is enough.
 
CrazyUglyCoyote said:
Leaving it unpianted in my opinion is just ricey. Doing everything you can to reduce weight will help your 1/4 time.
Adding paint isn't doint everything you can to reduce weight :rolleyes:
CrazyUglyCoyote said:
P.S. You dont see all the cars in F-1, Indy, Le mans, and what not showing off their bling bling. Their driving skills is enough.
They are showcasing their skills; we are talking about a street driven vehicle by a person who will rarely be able to show of his "skills" in a car that he just wants to know which in our opinion would be better, a painted or unpainted CF hood.
 
Don't paint, your car looks pretty good the
way it is.....

One question, what type of body kit is that????
 
Injected said:
Adding paint isn't doint everything you can to reduce weight :rolleyes:

They are showcasing their skills; we are talking about a street driven vehicle by a person who will rarely be able to show of his "skills" in a car that he just wants to know which in our opinion would be better, a painted or unpainted CF hood.

And I did give my opinion. And for you guys to flame me is wrong. And the weight of the paint is no more thatn the weight of a cup of soda in your cup holder. not really gonna make a diff. But when you compare a a difference of about 20 LBS it make a big deal, especially for us AWD guys who need to looses as much weight as possible!
 
CrazyUglyCoyote said:
And I did give my opinion. And for you guys to flame me is wrong. And the weight of the paint is no more thatn the weight of a cup of soda in your cup holder. not really gonna make a diff. But when you compare a a difference of about 20 LBS it make a big deal, especially for us AWD guys who need to looses as much weight as possible!

I know the paint doesn't weigh that much, hence the sarcasm. I'm not flaming you. You posted that exposed CF is rice. You sling the rice word like you have comprehension on the definition or connotation of the word. I'm just sick of the neo-witch hunting for ricers, it's just getting so damn ridiculous. I know that me getting onto one person for using ignorance in a thread won't stop it, but I'm just doing my part.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top