shifter?

[justin90gsx]

so i bought a stg 3 shep trans and its a 1991 23 spline and i have a 90 gsx, so i know i need a different t-case so will the 23 spline t-case fit on my driveline?

and someone told me i just need to change the shifter bracket but i was doing some reading and i found i have to change out my shifter and cables too?

so if i get 91+ shifter can i use the 91-94 symborski kit?

thanks

 

[Indian]

The only difference between the 90 kit vs 91-94 kit is the shaft mounting sleeve is not required on the 90. So you would have to get the 91-94 kit if your swapping out shifters.

 

[justin90gsx]

sweet #3 question answered, use the 91+ symborski kit for the 91+ shifter in my 90!
now for #1 and 2!

 

[Indian]

For question #1 as long as the splines match your good to go. For question #2: You will need the shift cables, shifter base, shifter, and the brackets that hold the cables onto the tranny.

 

[justin90gsx]

so the 91+ shifter base will bolt right in with no problems?
thanks for the help