seperating the trannyand engine

[boostmaniac]

What do I have to all do to seperate the block from the tranny? I did everything down to the bellhousing bolts and it has a gap but I know that the clutch ass. needs to be done . What about the transfer? Need to take it out to?

 

[djsm1769]

take the transfer case and starter . then check see if there is anything else that is holding tranny then seperate the tranny.

What do I have to all do to seperate the block from the tranny? I did everything down to the bellhousing bolts and it has a gap but I know that the clutch ass. needs to be done . What about the transfer? Need to take it out to?

 

[Mark S.]

remember to take the slave cyl off too and move it o ut of the way so when the tranny falls it doesnt rip the line out with it. Oh and of course the axles, and the braces that are bolted to the fram underneath the tranny

 

[FORMONTOYA]

on my 2g fwd below the starter from the engine side there is a 12mm? bolt that some people don't catch at first.

jim