SAFC problems

[agarcia892003]

i just noticed that my SAFC doesn't read 100% throttle when i have the accelerator all the way in...i did a couple of tests and it reads 100% when i do it manually..when i press the acceleration pedal it only comes up to about 89 90% and sometimes lower than that...what might be my problem? is there shorter throttle cables? is my TPS junk? i replaced the TPS about a year ago..thanks for the help guys..

 

[ROOKIE1]

Cables should be adjustable on top of intake . They are probably just stretched or did not get put back on right at some point .

 

[spoolup]

this is also common with cars with cruise control Try pushing a little harder, does it read higher (it is best to do this with the in the ON position, but not running). Adjustment can be made with the intake mani or tps sensor. As for a shorter cable, not really, but you can go to the dealership and purchase the throttle cable for the 2.4 spyder WITHOUT cruise (Mitsu PN MB948632). I made a write up on it here (linked in post 4): http://www.dsmtuners.com/forums/showthread.php?t=185777&highlight=cable its still a long cable that routes the way your currently does, except it gets rid of the intermdiate assy and vacuum acuator assy, as seen in post 10 in the link above.