RPS BOV anyone???

[VisionPaintball]

RPS Blow Off Valves, 50mm Blow Off Valve, RPS-BOV50MM | RacePartSolutions.com

Anyone have any experience with this?

Thanks

 

[JDT]

I never had experience with those, but then again, why take the risk when there's people selling used Tial 50mm BOV's for the same price.

 

[tkelly27]

I got a cheap 50mm bov. I like it, but I had to do a lot of work to get it working properly. If you want something to put on and go you'll probably want a real tial.

 

[JusMX141]

Same part for $15 less shipped. Yeah it's not black, but spray paint is cheap.

50MM BLOW OFF VALVE, XS Power Inc.

They do have red and blue.

 

[Boosted98gsx]

Let us know how long your engine / turbo lasts running that chinese mfg'd POS.

 

[outlawdsm]

There is also this, same thing for 50 shipped 50MM ALUMINUM BLACK TURBO TURBOCHARGER BOV BLOW OFF VALVE 35 PSI BOOST+SPRING | eBay

 

[JusMX141]

^ Nice find.

 

[VisionPaintball]

Nice. We will see if I blow up.

 

[93_tsi_fwd]

Same part for $15 less shipped. Yeah it's not black, but spray paint is cheap.

50MM BLOW OFF VALVE, XS Power Inc.

They do have red and blue.

Ran one of these couple years ago and it sounds/works just like my real tial i have now.

 

[laser90]

Bringing this back from the dead. Found some info that might be worth discussing.

[ame=http://www.youtube.com/watch?v=20imTYMqRlc]MD-104 Blow Off Valve by www.racepartsolutions.com/ - YouTube[/ame]


Quote from RPS on another forum

"Just for the record, almost everything we sell at RacePartSolutions is sourced through North American suppliers. The 2 most notable exceptions are our RPS house brand BOV's and EFI fuel pressure regulators. In both cases, we had customers looking for lower cost alternatives for use on mild street/strip applications. We went through and excluded several vendors, before we found our current supplier. We were very wary of putting our good name on Asian imported parts, since the reputation of such items wasn't pretty. Fortunately, we found our current supplier, and after initial testing on our own vehicles, and then beta testing through select local shops, we felt comfortable that the quality was suitable to carry our brand name."


We have sold several hundred of each of these items, without one single warranty claim. Our official policy is a one year warranty against material or workmanship failures. My personal policy is to make it right under any reasonable circumstances.

We're not some kid selling junk on e-bay out of his mom's basement. We're RacePartSolutions...a company founded and run by racers / for racers, selling products we've tested and stand behind 100%. If anybody buys one of these from me and EVER has a problem, call me at the shop (561-375-6277) or on my personal cell phone (954-616-7140) and I'll replace it or refund your money! Fair enough?

 

[rr06rs]

That is the $600 104mm valve that USE TO be made by JGS for RPS. Not sure if they still are as the sight now list Jodar as the manufacturer. I can tell you that JGS supply bov's and wg's to some of the fastest turbo and blower guys running 2000+ whp today. RPS doesn't sell junk. I wouldn't hesitate to run any of their products. Probably 75% of the parts for my fuel system, and turbo hotparts were purchased from RPS and nothing has ever failed me. BTW, before some of you that like to speak with comments like, "what ricer needs a 104mm bov??", you should probably take a peak at some of the centrifugal blower guys running low 6's in door slammers....

 

[laser90]

It's on sale now for $550 . If they contract high quality parts such as the MD-104 why would the "budget" One be any different. From what I've read from people who actually run it, it's a quality piece. I'm not saying don't buy a tial,turbo smart or etc just this might be a nice piece for the racer on a tighter budget.