rota d2's

[96797GST]

just slapped on some rota d'2s and the front center caps dont fit. is there anyone that had the same problem? what can i do so that they fit. i rather have the clean look then seeing that rusted piece hanging out.

 

[kchaazz]

As far as I know, the center caps dont fit on 1G or 2g DSMs because of the nuts for the CV axles protruding outward. Just take off the rear center caps as well for uniformity, and you could even remove the wheels and clean up the hubs with sandpaper and brake cleaner and then paint the nuts and hubs black or something so theyll look good.

(Oh, and this issue is specific to Rotas, though Im sure there are some other wheels out there that you cant fit front center caps on due to the same reason)

 

[96797GST]

that explains it all. thanks!

i got 18's...you wouldnt happen to know whats the widest tires that can fit a 2g?

 

[genegoesfast]

Check it!
http://www.dsmtuners.com/forums/frequently-answered-dsm-questions/286685-will-these-wheels-tires-fit.html

 

[dsm03]

Get some pics up !

 

[bNasty]

i used 3mm spacers in the front and ground down a little bit of the plastic to get them to fit

this was a longgggg time ago

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[kchaazz]

i used 3mm spacers in the front and ground down a little bit of the plastic to get them to fit

this was a longgggg time ago

You must be logged in to view this image or video.

You must be logged in to view this image or video.

What he said