The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

[RESOLVED] priming oil pump

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JNperformance

15+ Year Contributor
183
0
Dec 1, 2007
Tigard, Oregon
I know the ways of priming the pump, but need to know if doing the priming with the motor in the car and fuse out is okay. Or is that the second step after priming the pump. I also notice when I turn the key to ign (not start) the oil pressure gauge goes to hi and after start it goes down to low. I hope this enough info to help me.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 Groden alum rods. Set of 4 with ACL bearings
    Groden aluminum rods. Set of four. 22mm small end. With ACL race rod bearings. Locating...
    • Galant665
    • Updated:
  • For sale 4G63 Aeromotive 13113 Fuel Pressure Regulator
    Aeromotive 13113 Fuel Pressure Regulator $275 + shipping & paypal fees* these are $395 online...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1g Harness
    Wtb 1gb fuse box harness
    • 92AWDHX40
    • Updated:
    • Expires
  • For sale 2g 2G Water Pipe
    2G Water Pipe $50 + shipping & paypal feesYou must be registered to see element.You must be...
    • jersygsx
    • Updated:
    • Expires
  • For sale 1g 1G Turbo Water Pipe
    1G Turbo Water Pipe $50 + shipping & paypal feesYou must be registered to see element.You must...
    • jersygsx
    • Updated:
    • Expires
Back
Top