1. Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

Replacing Keyless Entry?

Posted by inspire, Dec 15, 2012

Please Support Fuel Injector Clinic
Please Support Southbay Fuel Injectors
  1. inspire

    inspire Proven Member

    97
    1
    Joined Jul 20, 2012
    757, Virginia
    I was just wondering if anybody has had any experience with replacing keyless entry. I believe my car had it, but no longer has the remote (was not with car when I purchased) and I would like to replace it, and find out how to go about programming it or learn what needs to be done. Also curious if a trip to SATAN will be necessary to get her unlocking again. If there is already a thread on this please redirect me, or post the link. I tried to search but didn't seem to find what I was looking for. Thanks!
     

    364  0

    1998 Eagle Talon N/T
    manual · 2G DSM
    Loading...
  2. RallyEclipse98

    RallyEclipse98 Proven Member

    552
    18
    Joined Jul 31, 2007
    Lincoln, Nebraska
    I just called my local stealership a week ago about this and they told me it would about $150 for a new remote and sync to car.
     
  3. inspire

    inspire Proven Member

    97
    1
    Joined Jul 20, 2012
    757, Virginia
    I would have liked to of heard a lot smaller of a number (for hitting a few buttons 150 is just ridiculous.) I swear there should be laws against the costs of auto repairs sometimes. Feel like you had a gun held to your head and you were robbed of everything by the time you walk out of the dealer. I never feel good when I leave a shop. Worried the problem wasn't fixed, they did not do something properly or even worse they charge you X amount of dollars for 3 hours of labor, while the job actually only takes them a half hour. Crooks.

    BTW Thanks for the info. Finally got a straight forth answer.
     

    364  0

    1998 Eagle Talon N/T
    manual · 2G DSM
    Loading...
  4. RallyEclipse98

    RallyEclipse98 Proven Member

    552
    18
    Joined Jul 31, 2007
    Lincoln, Nebraska
    Believe me, I expressed my disgust with Mitsu. enough for you and me haha.
     
  5. miguelmcv

    miguelmcv Supporting Member

    2,329
    161
    Joined May 3, 2009
    Fresno, California

    Street Build 535  1

    1997 Eagle Talon TSi AWD
    awd · automatic · 2G DSM

    2K  0

    1995 Mitsubishi Eclipse GST
    manual · 2G DSM
    Loading...
  6. 96DSM_Steve

    96DSM_Steve Proven Member

    134
    3
    Joined Aug 19, 2010
    Bakersfield, California
    I read all those threads and I still can't get my remote to program to the car.
     

    363  0

    1996 Eagle Talon TSi AWD
    · 2G DSM
    Loading...
  7. miguelmcv

    miguelmcv Supporting Member

    2,329
    161
    Joined May 3, 2009
    Fresno, California
    How are you programming it?,

    Give us step by step of the you are doing and we'll let you know what you are doing wrong.
     

    Street Build 535  1

    1997 Eagle Talon TSi AWD
    awd · automatic · 2G DSM

    2K  0

    1995 Mitsubishi Eclipse GST
    manual · 2G DSM
    Loading...
  8. Dsmkauai

    Dsmkauai Proven Member

    3,928
    414
    Joined Feb 20, 2010
    Kauai, Hawaii
    Dude get them from Mitsubishiparts.com they are like $60 I think I got two years ago for $40 from them. And you can sync it to car yourself takes like 5 min.
    Here's a post I take about it more in. http://www.dsmtuners.com/forums/maintenance-repairs/423252-alarm-i-didnt-know-i-had.html
    How to sync remote to car:
    1.Locate the Data Port.
    2.Insert keys in ignition and leave in the OFF position.
    3.Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire, leave jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
    4.Within 10 seconds after connecting the jumper wire, turn the ignition switch to the ACC position and then back to OFF. #Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
    5.Press the LOCK# button on the transmitter to be registered three times within 10 seconds.# Upon successful programming, the door will lock and unlock once.
    6.If there are two remotes, register the first, then register the second. Repeat step 5 within one minute to program second remote. After completing the second programming, the doors will lock and unlock once.
    7.Disconnect the programming wire and remove the keys from the ignition.
     

    Drag Race Build 844  2

    1995 Eagle Talon TSi
    fwd · automatic · 2G DSM

    6K  0

    1991 Mitsubishi Galant VR-4
    13.7 @ 101 · Galant VR-4

    4K  0

    1995 Mitsubishi Eclipse GST
    12.408 @ 112.930 · 2G DSM

    2K  0

    1998 Eagle Talon TSi
    manual · 2G DSM
    Loading...
  9. 96DSM_Steve

    96DSM_Steve Proven Member

    134
    3
    Joined Aug 19, 2010
    Bakersfield, California
    I did all of that. I followed the steps but nothing happens.
     

    363  0

    1996 Eagle Talon TSi AWD
    · 2G DSM
    Loading...
  10. Dsmkauai

    Dsmkauai Proven Member

    3,928
    414
    Joined Feb 20, 2010
    Kauai, Hawaii
    Are you sure you have pins 1 & 4 on data port?

    All your fuses are in place for the alarm. Check the fuses under the hood and inside car.
     

    Drag Race Build 844  2

    1995 Eagle Talon TSi
    fwd · automatic · 2G DSM

    6K  0

    1991 Mitsubishi Galant VR-4
    13.7 @ 101 · Galant VR-4

    4K  0

    1995 Mitsubishi Eclipse GST
    12.408 @ 112.930 · 2G DSM

    2K  0

    1998 Eagle Talon TSi
    manual · 2G DSM
    Loading...
  11. 96DSM_Steve

    96DSM_Steve Proven Member

    134
    3
    Joined Aug 19, 2010
    Bakersfield, California
    I'll check again. When I do the steps the locks don't do anything.
     

    363  0

    1996 Eagle Talon TSi AWD
    · 2G DSM
    Loading...
  12. Dsmkauai

    Dsmkauai Proven Member

    3,928
    414
    Joined Feb 20, 2010
    Kauai, Hawaii
    Also check the switch's in the door jam. They need to work properly, should be easy to test. They should turn interior lights on and off.
     

    Drag Race Build 844  2

    1995 Eagle Talon TSi
    fwd · automatic · 2G DSM

    6K  0

    1991 Mitsubishi Galant VR-4
    13.7 @ 101 · Galant VR-4

    4K  0

    1995 Mitsubishi Eclipse GST
    12.408 @ 112.930 · 2G DSM

    2K  0

    1998 Eagle Talon TSi
    manual · 2G DSM
    Loading...
  13. 96DSM_Steve

    96DSM_Steve Proven Member

    134
    3
    Joined Aug 19, 2010
    Bakersfield, California
    Everything seems to be fine. I tried to program it again still nothing. I am sure I am grounding pins 1 to 4.
     

    363  0

    1996 Eagle Talon TSi AWD
    · 2G DSM
    Loading...

Share This Page

Support Vendors who Support the DSM Community
ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications OHM Racing RixRacing RockAuto SouthBay Fuel Injectors STM Tuned Track Decals Track Sculptures VR Speed Factory