SasaniFab
Proven Member
- 2,433
- 782
- Dec 1, 2013
-
Mexico,
Connecticut
So after my walbro incident ive decide to get rid of the dual walbro setup in place of a large single. This is what the plan is... Opinions are appreciated. Part list
Magnaflow 750 pump
Magnaflow mp-7800 10an 75 micron filter for pre filter
8an orb to 10an fitting- for inlet of pump
8an orb to 8an fitting - for outlet of pump
10an orb to 10an fitting- for inlet and outlet of filter
10an y coupler- for two feeds from tank into filter
10 an steel weld on sump for tank
10an ptfe 90 fittings
10an ptfe hose.
So the plan is to weld in the sump on my stock tank, run two 10an lines off the sump to the prefilter, then 10 an to fuel pump, from the pump outlet 8an to my fuel lab fuel filter in the bay. How does this sound guys? Im over this needing fuel nonsense. A part of me wants to do a mechanical setup but i dont know how i feel about running a pump of the cam gear.
Magnaflow 750 pump
Magnaflow mp-7800 10an 75 micron filter for pre filter
8an orb to 10an fitting- for inlet of pump
8an orb to 8an fitting - for outlet of pump
10an orb to 10an fitting- for inlet and outlet of filter
10an y coupler- for two feeds from tank into filter
10 an steel weld on sump for tank
10an ptfe 90 fittings
10an ptfe hose.
So the plan is to weld in the sump on my stock tank, run two 10an lines off the sump to the prefilter, then 10 an to fuel pump, from the pump outlet 8an to my fuel lab fuel filter in the bay. How does this sound guys? Im over this needing fuel nonsense. A part of me wants to do a mechanical setup but i dont know how i feel about running a pump of the cam gear.
