Picture of Brian Crower valve springs PLEASE!

[92 GSR-4]

Hey all,

Can anyone post up some pictures of the DSM Brian Crower valve springs up close? Or at least describe any marks on them (such as the stripe painted on one side: what color?). Reason being, I am fairly sure I was sold a stock set of springs. Thanks is advance.

 

[BogusSVO]

I have 2 new sets of BC springs, no markings on one set, a small dark blue stripe on the other.

the best way to know what you have is have them checked,

stock springs will test 60-66 psi @ 1.575
the BC springs will be 95 psi @ 1.500 (+/- 5 psi) free length 1.879

 

[Black94DSM]

My BC Springs did not have any paint on them. They looked like a normal spring.

You must be logged in to view this image or video.

 

[92 GSR-4]

Thanks for the feedback, I'm going to have them checked out..

 

[92DSMErdrick]

I have 2 new sets of BC springs, no markings on one set, a small dark blue stripe on the other.

the best way to know what you have is have them checked,

stock springs will test 60-66 psi @ 1.575
the BC springs will be 95 psi @ 1.500 (+/- 5 psi) free length 1.879

Yea I remember my BC springs having a blue stripe down the side of each spring.

 

[jnf63]

Similar to other measurements provided. I can post pictures of the BC Spring Data sheet. I do not have pictures of the pieces before they were installed. However, I did not notice any color markings on them when I looked at them in their box.

Possibly, these figures can be used by a shop to determine if you have BC Springs. Otherwise, sorry for not helping.

 

[92 GSR-4]

Possibly, these figures can be used by a shop to determine if you have BC Springs. Otherwise, sorry for not helping.

This is AWESOME. Thanks!

 

[Ajax]

I have ones for the 420a and mine has a blue stripe