need help, new coil on plug and didnt know where the wires went

[97-gst]

the wires on my connector are red, blue and black, i couldnt find anything for the black only blue/black, wasnt sure were they all went bc i wasnt available to get on the interent were the car is but i matched the colors up, i just bought this new from spark tech, there instuctions just dont make any sense, i also have another connector that i originially used for the last coil on plug system that has a black red and white wire, idk im confused and aggrivated bc it wont start. anyone know which wires go to what? the wired on the COP colors are red, blue and black/blue, i got pics if anyone needs them

 

[2gTurBoD]

the wires on my connector are red, blue and black, i couldnt find anything for the black only blue/black, wasnt sure were they all went bc i wasnt available to get on the interent were the car is but i matched the colors up, i just bought this new from spark tech, there instuctions just dont make any sense, i also have another connector that i originially used for the last coil on plug system that has a black red and white wire, idk im confused and aggrivated bc it wont start. anyone know which wires go to what? the wired on the COP colors are red, blue and black/blue, i got pics if anyone needs them

I have a COP set up and I re used a plug from a normal coil, and Its basically just a power/ground/and signal. Red usual is your power, Black ground, and blue is your signal usually. And with the plug it makes it easy plug and play. Post the direction and ill try and decipher but generally thats how it works.

The reason I recommend you, re-using your oem connector it helps keeps the wires going to the right place. and makes install and unistall easy.

 

[97-gst]

ok, my connector has a red, black, and blue, do you know which wires coming from the coil on plug connect to those? theres a red a blue and a blue/black

if im using a eprom ecu, the 97-99 one works right?

 

[2gTurBoD]

ok, my connector has a red, black, and blue, do you know which wires coming from the coil on plug connect to those? theres a red a blue and a blue/black

if im using a eprom ecu, the 97-99 one works right?

Ill need a little bit more information. Is there a plug already on your cop? Or are there just wires? And each coil on plug set up is a little different. Mine came with all black wires so I would need to see your particular set up to know were things are going. Are you hard wiring them in. Im not a fan of cutting up the wiring harness on my car so I try to only mod the pieces I put on and not my harness.

This is a really good link to bookmark. Whoever took the time to do this is a genius. I use it anytime I put in my engine just to be safe. http://www.dsmtuners.com/forums/art...047-2g-engine-bay-electrical-connections.html

This is part that is specific for you.

http://www.dsmtuners.com/forums/151528349-post7.html

If you take a picture of the underside of your coil Ill try to draw you a diagram.