Need a little advice

[AllBoostNoJuice]

Made a couple of pulls last night now that I got my new injectors. Supposedly, they are 650's, but my SAFCII is only at like -12 to -15 in most places. Well anyways I am new to the tuning so I could use some advice. Here is the log.

rpm timing o2 1 st ft1 lt ft1
2100 28 .86 0 -5
2164 24 .78 2 -5
2304 25 .66 0 -5
2436 25 .28 1 -5
2612 17 .90 -1 -5
2876 15 .92 0 -5
3220 9 .94 0 -5
3868 9 .96 0 -5
4464 10 .96 0 -5
4960 12 .96 0 -5
5324 14 .96 0 -5
5808 18 .96 0 -5
6264 19 .96 0 -5


thanks

 

[AllBoostNoJuice]

nobody has any advice?

 

[turbolarry]

It looks OK to me; maybe a little lean around 3K rpm? It's a little had to tell due to the small sample. Try logging again without the long and short tirm fuel trims and see if you get a better sample.

 

[AllBoostNoJuice]

I thought that the o2 voltages were suppose to be around .92.

 

[turbolarry]

I'm only used to tuning with 91 oct.

http://www.roadraceengineering.com/instructions/autotimer.htm

 

[kpt4321]

I thought that the o2 voltages were suppose to be around .92.

They're not, necessarily.

 

[kpt4321]

You need to lean out your low throttle map, about 5%, maybe more.