The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

mysterious arc at the coil

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ccoulter0415

Probationary Member
20
0
Sep 29, 2011
massillon, Ohio
so we was messing around with my brothers talon and we were pulling plug wires off while the car was running and 4,3,2 were fine but when we pulled the plug wire off #1 and there was a mysterious arc only at the #1 coil. so we put the wire back on and the arc goes away. im pretty stumped. any suggestions??

the wires were taken off the plug not the coil
 
Last edited:
the coil its comin from is brand new because the old one wasnt producing the best spark and it wasnt consistant. and its still doing it
 
Well my car doesn't do it at all. He's havin a problem with the car sputtering past 10psi but it was never like that before. If he puts it half throttle it's fine but once he goes past that it's all downhill from there. It's getting enough fuel and it's for sure sparking now and it has good compression.
 
Well my car doesn't do it at all. He's havin a problem with the car sputtering past 10psi but it was never like that before. If he puts it half throttle it's fine but once he goes past that it's all downhill from there. It's getting enough fuel and it's for sure sparking now and it has good compression.

Did you boost leak test it, and close the plug gap a bit?
 
The first thing we did was a blt. We checked every possible place that could leak. At first we found the j pipe was leaking because there was no gasket. Then it was just a couple vacuum lines that was leaking so we replaced all the lines and there was no more leaks but it still runs like shit. The plugs looked good and the ignition timing seems to be alright.
 
#1 is sometimes a pain in the ass to get into the coil all the way. Id say you dont have this one plugged in properly. Take it off at the coil. Slide the boot back about an inch so you can grab the wire just behind the metal contact and jam it in til she clicks into place and then slide the boot onto the coil. Make sense?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 3 inch Magnaflow SS high flow cat
    3 inch Magnaflow stainless cat. High flow. 18.25 inches. Flange holes are 4 1/8 center. Has...
    • Galant665
    • Updated:
  • For sale 4G63 Forge Motorsports BOV
    Original Forge Motorsports bov. Adjustable with over 80 clicks on the dial. Nice to use for...
    • Galant665
    • Updated:
  • Wanted 1g 1991 Black Cherry Eagle Talon
    5-speed
    • bamatalon
    • Updated:
    • Expires
  • For sale Misc Left Over Parts
    Hello, I have a few left over parts for sale, these do not include shipping, please pm me for a...
    • r3dmak
    • Updated:
    • Expires
  • For sale Alpha Injection Clinic 2200cc for 4G63 DSM/EVO
    I have a set of Alpha Injection Clinic 2200cc high z injectors for DSM/EVO. I am stepping up to...
    • spoolinpos
    • Updated:
    • Expires
Back
Top