Motor Mount 97' 2g GSX

[rofljerry]

Hey guys have been browsing for some motor mounts for my car just figure out which ones to get. Any suggestions limit spending is under a grand cause i plan on doing more than just motor mounts. :]

 

[ThunderChild]

Prothane inserts or full Prothane replacements. iirc they're 70-90 a set shipped depending on car.

Unless u want all new actual mounts/brackets. I can't speak for anything in that dept

 

[spyderdrifter]

Prothane poly mounts. Had them in my current and last 2 DSMs. Well worth getting.

 

[TSiAWD666]

I am using avid racing ones in my car, racing for three years so far. 90 durometer. Working well so far. The front poly did tear but they sent me a complete set under warranty. If you get them make sure to use some loctite on the bolts holding together the rear mount as without they can work loose.

 

[95GSTowner]

I am using avid racing ones in my car, racing for three years so far. 90 durometer. Working well so far. The front poly did tear but they sent me a complete set under warranty. If you get them make sure to use some loctite on the bolts holding together the rear mount as without they can work loose.

I'm also using avid racing (street) motor mounts and I really like them. Motor and trans are very tight! The only downside for me was having to buy longer bolts for driver side mount and the transmission mount seems too thick since it doesn't leave many threads for the nuts. Mine are a few years old and I believe this was revised.