Magnaflow Dual Exhaust on a 1G

[NiKKUH_BOViCE]

Hey, I just came back from a local junkyard looking for a nice exhaust for my eclipse, and i came across a nice 2nd gen rx7 that the guys are parting out. It has a full magnaflow dual exhaust on it, and they are selling it for DIRT cheap. I recently found a couple holes in my exhaust pipes, and its all rusted out. So will that dual exhaust work with my car(NT), and how much fabrication will i need to make it fit. If it matters, im planning on using ebay SS headers.

 

[LiquidX]

I personally think that duel exhaust on our cars looks bad. If you want to, then do it but it'll need a bit of custom fabbing to get around the gastank and frame. I would also stay away from ebay manifolds/headers as they have been known to crack. The n/t header may be different without the weight of a turbo on it. You'll get more opionions I'm sure, but Magnaflow is a good muffler. Have one on my car.

 

[caboose]

i wouldn't be too worried about the ebay headers, chances are it wont crack and if it does they are cheap to fix/get a new one. The dual exhaust will require a bit of fabing but the magnaflow is a good set up.

 

[dsmdeliveryboy]

Just buy the exhaust and have a muffler shop hack it up and make you something you want from it. Your car will look retarded with dual exhaust, and why add the extra weight of the dual exhaust when you don't need to. GL

 

[blackGSX2g]

Any good exhaust shop should be able to repair rust holes in your current exhaust for pretty cheap. They should even be able to build you your own turbo/catback for a few hundred.

Here is a thread with a home-made dual exhaust on a 2g AWD:

http://www.dsmtuners.com/forums/custom-fabrication/349975-dual-exhaust.html