maft translator 10 pin harness

[Number1dad]

on the ten pin gen2 translator how to i work with wires yellow green brown and gray

 

[xxxSpetsnazxxx]

Your yellow and green wire will connect to the stock MAF wire.
Find pin90 on your ECU, that's your MAF wire. Cut it (don't cut to close to the ECU, leave some slack)
-Connect the yellow wire to the wire that's going to the ECU.
-Connect your green wire to the other side of the wire that you cut (which goes to the MAF)

And if your using your stock MAF, then you don't need to do anything with the brown and gray wires. If your using the GM MAF style MAF,
-Then connect the brown wire to pin72.
-Connect the gray wire to pin85.

http://www.fullthrottletech.com/attachment.php?attachmentid=301&d=1151351071

Keep in mind this is for a 2g.
It may be different for a 1g