Looking for some suggestions on my next big build

[eclipsers97boy]

First things first my goals for this build is I wanna build a streetable 500hp GSX.
Curently I have a 1998 Eclipse GSX w/Evo3 16g and some basic bolt ons. I have an extra Stripped down block and an Extra Head(its the original motor from the car was crank walked when purchased)

There's two things I know I wanna do and that is 272 Brian Crower cams and an HX35 Turbo and at bare minimum 20 pounds of boost.

I'm looking for any and all suggestions including on wether i should stroke it out or bore it out. I want the entire motor redone.

thanx for the help ahead of time

 

[monster4g63tawd]

i say stroke it for sure. and push more than 20 lbs of boost with that hx35. no point in getting that turbo if your gonna push 20psi when you can push 20psi with the e316g you got and it would have less lag.

 

[eclipsers97boy]

If i run the hx35 i'll end up pushing 30-40 psi in that case

 

[dsmpat95]

The bc 272 will be at their limit around 500hp. Look for thier 280s or a different type.