Misterbeechy
10+ Year Contributor
- 576
- 1
- Aug 11, 2010
-
Bronx,
New_York
NOTE: this is not my dsm
Setup is:
2g GST w/ 6 bolt swap
*FMIC with bov NOT RECIRCULATED
*Stock FPR w/ Wally 255 (also wally not doing the whiring sound as it used to)
* 450cc injectors
went from PTE 60 turbo to t25 for the mean time til pte gets rebuilt
The motor recently jumped time and bent valves we placed another 6 bolt head on it and ever since the swap 1st and 2nd run normal / rich 10.0 - 11 afr..
Then gears 3 , 4 and 5 start leaning out and NO these are not WOT pulls 14.0 - 15.0 afr
Im just providing as much info that may be related.. if there is no relevence then just ignore..
i think it could be due to stock fpr with 255 wally..
Setup is:
2g GST w/ 6 bolt swap
*FMIC with bov NOT RECIRCULATED
*Stock FPR w/ Wally 255 (also wally not doing the whiring sound as it used to)
* 450cc injectors
went from PTE 60 turbo to t25 for the mean time til pte gets rebuilt
The motor recently jumped time and bent valves we placed another 6 bolt head on it and ever since the swap 1st and 2nd run normal / rich 10.0 - 11 afr..
Then gears 3 , 4 and 5 start leaning out and NO these are not WOT pulls 14.0 - 15.0 afr
Im just providing as much info that may be related.. if there is no relevence then just ignore..
i think it could be due to stock fpr with 255 wally..