eder-loco
15+ Year Contributor
- 133
- 0
- Feb 19, 2006
-
pasadena,
Texas
I recently was connecting my Wideband to my o2 sensor wire. and i made the mistake and cut the wrong wire. witch was the Knock sensore wire!.
So i butt connected it back together,and it feels solid on there together. i kind of pulled on both sides and they stay together just fine Now Now. How would i know if its making a good connection or even logging at all?
I have dsmlink and while doing WOT pulls it doesn't report any knock, the tune is good and everything. I dont want any knock , i just want to know if there is way of telling the knock sensor is working along with the ecu incase it sees Any.I know it worked before because when i had a smaller nozzle with the meth kit, it was getting a bit of knock. but now with a bigger nozzle i dont get any knock.
could that be why?
any suggestions welcome. thanks
So i butt connected it back together,and it feels solid on there together. i kind of pulled on both sides and they stay together just fine Now Now. How would i know if its making a good connection or even logging at all?
I have dsmlink and while doing WOT pulls it doesn't report any knock, the tune is good and everything. I dont want any knock , i just want to know if there is way of telling the knock sensor is working along with the ecu incase it sees Any.I know it worked before because when i had a smaller nozzle with the meth kit, it was getting a bit of knock. but now with a bigger nozzle i dont get any knock.
could that be why?
any suggestions welcome. thanks
