2G Kiggly front clutch measurements?

[CrackedDSM]

The search function is broken, and google yielded no results for me, so sorry if the answer is easy to find. I did try searching.



If anyone has a set of the kiggly 5-disk front clutches for our DSM autos, can you measure the OD of them, count the teeth on the inside of the clutches, and measure the thickness of the friction disks for me as well as the steel disks? I'm trying to figure out basically if the A4BF-3 front clutches and steels are the same as the kiggly kit.

 

[hotrodssnova]

This is for a 1 g, but it might help. I didn't think there was a difference internally except the lockup tc. This is from red alto website.
I will see if i can find a tooth count.

Alto # 108754 POWERPACK® CONTENTS:
5 Frictions Plates #108740-152 Red Eagle (.059/1.5mm)
4 Steel Plates #108701K152 Kolene (.059/1.5mm)
1 Bottom Apply Plate #108701K380 (.150” / 3.80mm)
1 Top Pressure Plate # 108762-445 (.195” / 4.95mm)
1 Snap Ring #077252-090 (.090” / 2.29mm)

steel is 26 tooth
friction looks to be 38 tooth
this is the stock replacement frictions and steels. it will have the same count on the 5 disk setup. only things that change are the thicknesses. here's a link to the info:
http://www.makcotransmissionparts.com/F4A32-1.html

 

[CrackedDSM]

Hmm. Well damn. If the Alto front kit is the same as the Borg Warner front clutch kits then the ones I was thinking of from the AFB4-3 are different. Ah well.