January 13th Food/Cruise Gathering!

[1ghaaaaaw]

Not To Mention The Passengers Of Them There 50 Dsm,ers So Like 100 People Lookin To Eat... We May Need To Work This Out, I Doubt Even Red Robin Can Handle A Crowd Like That.

 

[usneclipse03]

Hey add me to the list of people coming! It will be good to do one last thing before i leave on the 15th for my 6-9mth deployment. So i'm in fellow dsm'ers!

 

[95CarbonEclipse]

We May Need To Work This Out, I Doubt Even Red Robin Can Handle A Crowd Like That.

Good Point. I'm trying to think of a place that COULD handle a crowd like that.

 

[lccynmbr13]

Real deal if all else fails we could just do the food court in the mall. Quick easy and a shitload of seating and something for everyone.

 

[Talon_Got_Boost]

Update: Car project is completed. Had some misfiring I was huntng down that turned out to be bad sparkplugs...go figure. Anyways, she runs smoothly and have 200 miles on the new motor so breaking her in gently for now as well for the meet....just cruising. Tonight we are putting 1GHAAAAAW's new bigger rotors and dual piston calipers. Doing some boost leak tests on both cars and messing around with little crap. I may be swapping in the 4bolt rear since mine is starting to moan even louder under decel now...the vibrations are getting on my nerves.

I agree, will be easier to eat at the mall where you can go and pick anything and then just slowly move into a large area of seating.

We have a pretty decent supply of stock parts in the back if anyone is needing something asap for a little cash and can pick it up in the evening (Have to save up for a MAFT TRANSLATOR ). Just PM myself of 1GHAAAAAW and we will see what we have.

 

[Meklo_4G63t]

Man I know the 13th is around the corner and I just wanted to know how many people are coming from the west sound region so we can meet before heading there

 

[thorlief4g63]

I think that the mall is a good idea with so many people. If we go to other places we would have to split and thats no fun.

 

[DSM_Zak]

I suggested the mall earlier, but you guys shot me down

We NEED to stick to the plan. Play it by ear. When everyone is there we can make the decision to go to red robin or just some good food in the food court.

I'll be able to make it, hopfully in my new DD I'm planning on picking up tomarrow or sunday.
It's a green 99 mirage coupe 5spd with 86,XXX miles on it. 33city/40hwy MPG. Time to save every penny for a motor build and FP3052, maybe even just a FPGreen

Shes going to haul ass.
But if peter makes it or anyone over 400awhp, I want a ride as I havn't even even been in a car with a good amount of power

 

[Meklo_4G63t]

I dont know what mall but ok..... Zak I was talking about people near me. I got the directions from u but if i roll i didnt want to roll alone. But over here in Bremerton its even harder to meet up on Wednesday nights than anything () there one guy i know that got a 95 GST fro Poulsbo but I hes coming.

 

[Meklo_4G63t]

Zak u decided this thing and it should be where u think its best because some place if u hang out at the call the cops on u like found out real quick on Wednesday. I was just talking to somebody and they say Kent and Renton are get shut down a lot for tuners. If u got it organized the way u intended then go ahead as planed. Im down for it as long as we dont get cursed out by an angry store owner to get off his property

 

[blkwidow]

Hey you guys if my DSM is still running I think I might show. I just moved here to Lakewood and I don't know anyone. Looking to make friends and get some info on the smog laws. Hope to see you guys there. Whats the offical meet place? Any DSMers in my area want to get together so I can follow and not get lost?

 

[Meklo_4G63t]

Hey you guys if my DSM is still running I think I might show. I just moved here to Lakewood and I don't know anyone. Looking to make friends and get some info on the smog laws. Hope to see you guys there. Whats the offical meet place? Any DSMers in my area want to get together so I can follow and not get lost?

Ok I know where u are if im correct thats on the southend of Tacoma. I want to go to this thing to but I dont know if its better for u to come up 5 to 16 and then 3 thru bremerton but im willing to roll

 

[debow_8787]

go 512 to 167 and meet us at the super mall at 10 and follow all the ppl that are meeting there.

 

[lccynmbr13]

Zak u decided this thing and it should be where u think its best because some place if u hang out at the call the cops on u like found out real quick on Wednesday. I was just talking to somebody and they say Kent and Renton are get shut down a lot for tuners. If u got it organized the way u intended then go ahead as planed. Im down for it as long as we dont get cursed out by an angry store owner to get off his property

Only on Friday and Saturday nights AKA race night. We shouldn't get any trouble. And we aren't going to be on a store owners property this garage is part of the Sound Transportation park and ride system... We can all say we're making sure we have good parking spots to get on the bus for work on Monday

 

[slow4g6392tsi]

Ok, so I guess I am pending. My car has been at English since the 19th getting the tranny rebuilt and a few other things . I guess it is kinda cutting it close but Lucas said he is sure it will be done and ready for me to pick up on Sat. the 12th.

 

[blkwidow]

Ok I know where u are if im correct thats on the southend of Tacoma. I want to go to this thing to but I dont know if its better for u to come up 5 to 16 and then 3 thru bremerton but im willing to roll

Just give me an address man. I'll mapquest it and we can meet up.

 

[Thumper32k]

I'm sitting here bored at work and was thinking.....If anyone needs any OE aftermarket parts today that wants to come to the eastside. I can hook up some pretty good deals so just drop me a PM. This way more fixxed car means more turn out at the meet!!!

 

[usneclipse03]

Hey so where is everyone or most of the dsmer's meeting at? I live right next to Alderwood mall but want to cruise with some dsm's before we all meet and eat. So let me know so i can meet up with yall

 

[fast90eclipse]

ya im maybe not going to make it. im having clutch pedal pressure problems with a new clutchmaster i should say my 4th master. either theres a leak some were in the line. ive already replaced the slave but it works but holds a pedal almost all the way to the floor.for like 2 seconds and than gos straight to floor. but if you pump it like 80 2 100 times it'll hold long enough to shift 1st to 2nd and than to reverse. cant figure it out. any help would help so i would be able to go to the meet.

 

[DSM_Zak]

fast - sounds like air in the system.
bleed and bleed til your heart stops.


As far as where the meet is, its going to be at the Alderwood Mall parking garage.
See post #1 for info and directions
to see who is coming check post #2

If the crowd is too big, we will just stay put at the mall, and go inside for some food.
easy enough.
anymore questions, PM me.

 

[JG63]

ya im maybe not going to make it. im having clutch pedal pressure problems with a new clutchmaster i should say my 4th master. either theres a leak some were in the line. ive already replaced the slave but it works but holds a pedal almost all the way to the floor.for like 2 seconds and than gos straight to floor. but if you pump it like 80 2 100 times it'll hold long enough to shift 1st to 2nd and than to reverse. cant figure it out. any help would help so i would be able to go to the meet.

Ya besides air I would look under the clutch pedal to see if you have a leak from the Master Cylinder. Like a stain on the carpet.


There is a place in Everett that will make a SS clutch line. That helped me when I was having trouble. I just brought in a slave cylinder so they could match the fitting. It cost like $40 and they pressure tested it right in front of me, to like 60-80+ psi . You can buy a master cylinder clutch rebuild kit from mitsu as well, a cheap / easy fix.

I found their phone number on the card I have, looks like there is a shop in Tacoma:


Western Fluid Components
253 922 5710

2412 Pacific Highway E.
Tacoma, WA

 

[fast90eclipse]

ok is bleeding a clutch master just like bleeding the brake system. just wanting to make sure theres no special tricks to bleeding the master thats really pissing me off.

 

[fast90eclipse]

o ya im going to use a air vactula to help bleed the system. just to see if that helps. that and any one thats done bleeding on a clutch master on a dsm before would be a big help. cause this clutch pressure problem is really pissing me of i miss driving my gsx for like 3- weeks because of this problem.

 

[debow_8787]

ok is bleeding a clutch master just like bleeding the brake system. just wanting to make sure theres no special tricks to bleeding the master thats really pissing me off.

yeah it is the same

 

[fast90eclipse]

hopefully either all the air gets out of the system or something else is a problem in betweenthe clutch master and slave. ive got all week to figure this problem out and hopefully have the problem fixed in time.