Is this Clutch ok to use again?

[Carney714]

I have a centerforce clutch that came with the car. I tore the car apart 5 months ago and finally got around to assemble everything. But im curious to see if my clutch is ok. It didnt slip or had no problems when it was in my car.

Take a look at the pictures and let me know what you think. (im only doing like 320-350 hp to the wheel)
And which side faces the flywheel?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Mischif]

Throw that clutch and pressure plate away.

 

[jonathanfl]

Junk, good thing you Checked !

 

[craig4g63]

Throw that clutch and pressure plate away.

Based on?

 

[McDizle]

I'd scrap both the clutch and pressure plate. If money is tight I'm sure you could run it a little longer but you'll just end up replacing it a lot sooner than just replacing them now

 

[1G Eclipse94928]

looks like about 30%-50% left?

 

[JusMX141]

Disc is almost down to the rivets, definitely almost down to where the "pads" on the solid surface disappear. Pressure plate is heat scored- may be able to use it again on a new disc, but I wouldn't if it were going in my car.

 

[McDizle]

Take a picture of how the thickness of the pads. It's kinda hard to judge from the aerial view a picture like this (this clutch was toast)

You must be logged in to view this image or video.

 

[Carney714]

Sorry for the late response, heres some additional pics.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

just curious that the first picture that you see, it has some wear like it was scrapping on something.

 

[jonathanfl]

I dont understand.. you ask about it and are told change it but want to keep it. It looks like its in rough shape (disc and pressure plate). Everyone would agree change it while its out, if you want to keep it just start saving for another one and know youll have to replace it soon.

Personally I dont like doing a job twice especially if I have all the parts out the first time knowing the parts going to go shortly.

 

[Carney714]

Oh no, I just wanted a opinion and after the first post I went out and bought a competition stage 2 clutch from road race engineering. That's why I took a while to reply. Someone wanted side pics so I took some