2G I NEED replacement rotors - Baer Track and Cobra bbk questions

[mikejsmith1985]

I’ve reached out to Adams Rotors and they can’t tell me if they have a rotor that matches the specs of the Baer engineering diagram.

I picked up a Duralast rotor for a 98 Cobra from Autozone and it is not surprisingly a dimensional match to the Oreilly rotor.

I’ve also emailed EBC and Centric, with centric I explicitly asked if the part #s provided above by Talon77 have the same hat offset as the Baer rotors. Neither company has responded. At this point I feel like it’s definitive that the Baer rotors are the only option for a 1pc rotor on a 2g application.

 

[ceedawg]

Can you just go eradispeed 2 piece then? More expensive but I believe are available. That is what I have and will soon be changing so I can put on my Stoprech setup. Rotors and calipers.

I will admit my baer setup with the 2 piece rotors works flawless. Lighter than the stoptechs and sometimes has me thinking to reconsider.

 

[mikejsmith1985]

Can you just go eradispeed 2 piece then? More expensive but I believe are available. That is what I have and will soon be changing so I can put on my Stoprech setup. Rotors and calipers.

I will admit my baer setup with the 2 piece rotors works flawless. Lighter than the stoptechs and sometimes has me thinking to reconsider.

I hadn’t heard of these before, I did contact Coleman and for them to build me 2 piece rotors in the cheapest configuration replacement rings would only save me $20 each over Baer 1pc rotors and I of course have the upfront cost of about $900 to get the hats, hardware, and first set of rings. I’ll look into these and see if it’s a viable option.

 

[ceedawg]

I would call Baer up and inquire about the eradispeed 2 piece rotors that came with the old 2g kit. I am sure those rotors are still available. Mines are slotted and not drilled 2 piece and they are excellent.

 

[50trimgst]

I don’t understand how someone gets them to fit and others don’t?

 

[mikejsmith1985]

I don’t understand how someone gets them to fit and others don’t?

It doesn’t make sense to me but so far all accounts I’ve found of cobra rotors bolting up and working seem to be on 1g cars.