420A How to remove injectors from 420A fuel rail?

[daveeclipse99]

does anyone know how to take the injectors out to replace the stock ones ?

 

[myturbo]

once you have the fuel rail OFF, just twist/turn and pull and they will come out.

 

[daveeclipse99]

how do you get the rail off

 

[brassc2007]

they make the search option on this forum for a reason but since i feel like being nice you unbolt the fuel rail and i cant recall if the 420a is a banjo fitting like the 4g or not but you disconnect the fuel line and there you go.

 

[brassc2007]

it should be a couple of 13mm bolts its a pia but it can be done without to much hassle

 

[EDM95]

This is what i did.
1. lift up back seat take off the round plate diconnect the fuel wire.
2. start car until it dies out start again a few more times to relive fuel pressure.
3. disconnect negative battery cable.
4. disconnect all the wires to the fuel injectors.
5. take a 13mm wrench ratchet and remove the 2 bolts holding on fuel rail.
6. Remove the two bolts and unclamp the hose on the side of the fr.
7. pull out the fuel rail straight back it will take a little strength.
That is how i did it.