holset gaskets

[dsm4life91tsi]

iam trying find the gaskets for holset bep housing, the manifold to turbo and turbo to o2 housing any places i should be looking. stocking housing not t3

 

[RoryBarron]

You use stock dsm gaskets since it bolts up with stock flanges. ExtremePsi has both I can guarantee it.

 

[LiquidX]

If you are using the BEP bolt-on housing then Rory is correct. I would suggest getting the MLS manifold to turbo gasket (only place I know of that carries it is Forced Performance) and for the o2 housing gasket, place it on the housing side and mark what will most likely need trimmed off.

I have a post somewhere in the main Holset thread (either 7 or 8) that shows the over hang of a generic o2 housing gasket which needed trimmed.

 

[dsm4life91tsi]

ok guys, thanks for info.