Help Tuning an AUTO

[Eclipse223]

Hey guys what’s up. I have my 97 GSX and have a BIG T28 Ported, 3in down pipe, HKS Intercooler Piping. GReddy Bov, Bomz Intake, Custom Catback, 255hf fp, 680injs, SAFC2, A logger and boost, A/F, OilPres. Gauges. I am working on tuning also I have NGK PLUGS AN WIRES gaped at .28 so what should I set the fuel at the timing at and the boost at I ran the fuel at -20 all the way across the board on the SAFC and it runs balls to the wall. But I am not a great tuning person. So any help would be much appreciated, Also this is an auto so I don’t know how much that will affect stuff.

Thanks Again Guys

Brien

 

[Rice Over Wheat]

http://www.dsmtuners.com/forums/showthread.php?t=111005

Similar setup to me. I am setting my baseline at -28% HI/LOW across the board before I tune. That's slightly richer than the -30.77 that would match my 650s flow to stock 450s. If you are on stock FPR with 680s, your baseline is -33.82. Use the excel sheet in one of those guides.