Halo Headlamp Install Question

[FlyingKites]

Hey guys,

I just bought a '96 Eclipse RS and a urethane KBD body kit. The only problem is that I need 97-99 headlamps to fit the body kit. I was thinking of getting these:

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

with these bulbs:

H1 12V 55W Super White Halogen Bulb Low Beam Headlights Head Lamps Replacement | eBay

H3 12V 55W Super White Halogen Bulbs Kits Fog Lights Driving Lamps Replacement | eBay

Will I need anything else to install the new headlamps? Or are they just plug-and-play? Thanks in advance for the help!

 

[cpoindexter]

I would check to see if the bulb sizes are the same for all 2g eclipse. If so, your bulb harnesses will not have to be changed, it should be plug and play after you install the headlight housings.

 

[knochgoon24]

You need 9005 and 9006, not H1 bulbs.

 

[FlyingKites]

You need 9005 and 9006, not H1 bulbs.

You absolutely sure? The ebay page for the housings says use H1 and H3.

 

[blkgst97]

Mine use h1

 

[FlyingKites]

Mine use h1

Do you have a '96 eclipse with '97 headlights?

 

[Blurred Talon]

The wiring is the same so it doesn't matter what year the car is.
I had a 99 Eclipse bumper on my 96 till I switched back to Talon body parts.

You need H1 bulbs to fit the projector lights but I'm not sure if they will be plug and play.

 

[blkgst97]

Do you have a '96 eclipse with '97 headlights?

No, I have a 97 with...97 headlights. The projectors took h1 bulbs but the lights were not plug and play. I had to splice wires because the connectors were different .

 

[ed1380]

You need 9005 and 9006, not H1 bulbs.

He meant the aftermarket headlights he wants use H1 and H3

 

[knochgoon24]

Ah. I missed this line in the ad.

Use H3 light bulbs for Low Beam and H1 light bulbs for High Beam.