1G Gauge Cluster Bezel

[SilverEclipse96]

I have my gauges in the bottom radio bezel but sometimes its to distracting to look at them.

Does anyone make a bezel similar to the 2g gauge cluster one but for the 1g??

 

[hhuricane]

Not that I've ever seen. The only gauge pods I've seen are the A-pillar ones.

 

[tsi4g63dohc]

find someone on here to make u a custom one ...alot of people do

 

[rommel rojasgsx]

if you have no ac, they sale one that goes in the center vents. apilar we cant use the 3 gauge pod couse of seat belt. i took my stock oil preasure gauge out and fitted my aem wideband gauge in its place. looks real nice. with the black bazel looks stock.also i placed some on top of radio. better than under it

 

[tsi4g63dohc]

do you have a pic of your aem ?

 

[SilverEclipse96]

I would deff get the vent bezel if I did not have AC. On the other hand an a-piller pod is nice but I think it will attract thieves

Rommel do you have any pictures of your wb gauge?

 

[xxxbigirishxxx]

I noticed that Glow Shift sells a triple guage bezel for the A pillar. Don't know if it's actually usabe though because of previous posts saying that the seat belt interferes.

 

[JamesTSi]

I noticed that Glow Shift sells a triple guage bezel for the A pillar. Don't know if it's actually usabe though because of previous posts saying that the seat belt interferes.

I can tell you with absolute certainty that the GlowShift triple pillar pod WILL work on a 1G. I bought that same exact pod from eBay to put in my '91 Talon. It is cut properly to overlay the factory A-Pillar trim, and does clear the auto seatbelts.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[V8killerturbo4]

I built one for the steering column out of fiberglass, it works well but does block the factory turbo gauge and about the first 10mph on the speedo. Other than that I like it.

http://www.dsmtuners.com/gallery/files/2/4/1/1/img_0147.jpg

You must be logged in to view this image or video.

 

[90tsiawdturbo]

go on ebay and type in dsm gauge pod...theres multiple types that fit the center vent....2 gauges with a little vent in the center,3 gauges no vent,and 1 gauge and safc...those are the one i seen their might be more...theyre around 15 bucks give or take a few...

 

[chenk18]

How does he have a n/t gauge cluster?

 

[90tsiawdturbo]

Oops my bad

 

[redline2]

You could put them up on the dash board right above your AC vents. That's a possibility

 

[motozachl]

go on ebay and type in dsm gauge pod...theres multiple types that fit the center vent....2 gauges with a little vent in the center,3 gauges no vent,and 1 gauge and safc...those are the one i seen their might be more...theyre around 15 bucks give or take a few...

This. Or many people just fiberglass their own. Personally I am replacing the vent knobs with boost/oil/water gauges and put the wideband where the main air control is. Just brows the interior pics to get some ideas

 

[tsi1991awd]

I used to wonder the same thing....but I bought the vent "pod". Have the boost gauge and oil pressure gauge in it. Nothing wrong with that, you can easily look over and see the gauges and still pay attention to the road.

 

[Tbenner05]

I built one for the steering column out of fiberglass, it works well but does block the factory turbo gauge and about the first 10mph on the speedo. Other than that I like it.

http://www.dsmtuners.com/gallery/files/2/4/1/1/img_0147.jpg

You must be logged in to view this image or video.

You may not have the car anymore but I was interested in the install of the radio in the pic.