garrett turbo in 420a

[Tierrell12]

i have a garrett it is a 48 a/r that has a flange to bolt up to a t3/t4 manifold will this work for my car im trying to put together a turbo system for my 420a

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[sleeping95gsx]

Turbos for the most part are universal, so that turbo would be fine depending on your power goals. Just make sure you build the 420 to handle boost..(fuel system etc.)

 

[DSMcrazy3]

Yes the T3 flange is the most popular for the 420a-turbo setups. However, if you had to ask that question I'm going to advise you to do alot of research before attempting to install this.

Best of luck!

 

[95eclipseSlow]

I have built a 420a before. Just get a log style t3/t4 manifold off of ebay and bolt your turbo up. When building a 420a you are going to want to monitor as much as possible. Upgrade your fuel system. Which fuel setup are you going with? I went the standalone route with megasquirt standalone ecu,1:1 fpr, wally 255 rewired, 450cc injectors, LC-1 wideband.