Front cross member poly bushings!

[race_me89]

"Nobody" makes "cross member" bushings but today I was working on my 92 GSX and as I was installing my subframe bushings I decided to pop out one of the crossmember bushings and it was the exact same as the smaller bushings in the subframe. So my options are to order another subframe bushing set or call energy Suspension and ask if I can buy the inserts and sleeve separate

This is a 1g part so not sure on the 2g front crossmember

The whole kit was only 40 bucks so not a big deal

It's a 2 part bushing with a a sleeve and two washers

PT# 1008 main bushing
1019 second part of bushing

15.10.177.39 sleeve
15.03.05.39 washers

 

[lowell]

I always buy 2 kits and toss the leftovers.

 

[Ghost_92TSi]

Your talking about the two in the front where the little tow hooks are right? Let me know what you find out, I'm thinking about busting out my subframe while my motor is out, should be easier. I can always go back and do the control arms when the funds are there.

 

[hayourwifeleftu]

I found this out years ago by accident I thought that's what they where for till I went to the rear and didn't have all the bushings . I plan on just getting a bullfab from crossmember the 3 piece kit