FPG Install (OBX w/Gauge)

[GSXeclipsePSI]

Ok.. I got a FPG for my car like I was told to do wit my Mods.. Now my problem is that I think the shop where I had my car put to get it started ####ed wit my Vaccum lines and that's why my car is running like shit..

Could someone explain how the hoes should look for the following things...

1. Fuel Pressure Silonide
2. Fuel Pressure Reguatlor
3. Boost Gauge

I think they messed up the lines so my car doesn't get the fuel it needs..

Thanks
kendel

 

[temfate]

For starters, what pressure does the fuel pressure gauge read at idle? 35-37?

As for the hose connections, someone else needs to chime in since I'm not incredibly familier with it yet. I just bought the same FPR setup and am waiting for it to put it in...

The one thing I do know, the fuel pressure solenoid gets it's feed from the intake manifold and that's where your boost guage should be tapped in.

 

[GSXeclipsePSI]

I'm getting crazy numbers like 100psi... its ####in weird!... It's pissing me off!

 

[temfate]

That's not good at all! Try to adjust it to 36psi or so... Over 100?!?! My word man! Has your car launched to the moon yet?

If it doesn't lower enough to do this, try to map out what goes where and post it for verification. I wonder if the boost is leaking into the fuel line in the reg...

 

[GSXeclipsePSI]

You must be logged in to view this image or video.

This is how it is curretly setup. The fuel line did get crimped at the tank end when my friend didn't use 2 wrench's and twisted the line alittle.. and at the end of the fuel rail there is a small bend... Not serious tho!