fastest MPH with a small 16g

[coltboostin]

as the title says, I was wondering what the best mph was with a small 16g. I just went 119.8, wondering how it matches up.

 

[RamenPride]

as the title says, I was wondering what the best mph was with a small 16g. I just went 119.8, wondering how it matches up.

www.dsmtimes.org

 

[CanadianTSi]

Well according to that...he's the fastest by 2mph...

 

[diambo4life]

That's very impressive. It's a shame you are still in the 12's. That's FWD for ya!!

 

[awd4g63]

Those times are the fastest for a small 16g on a DSM. You have a light-as-hell Colt.

Nice times, though Was this with slicks?

 

[coltboostin]

slicks, but not really because they dont work well with my settup anymore. They were good when I was making no power, but I am now so its no good.

I could do no better than a 2.0 60ft, and that is bouncing off the rev limiter in 1st from spinning the slicks and spinning them 1/2 way through 2nd. They are only 6 inches wide, 20 tall.

Another setback is I was hitting the traps at 6700rpm according to my logger in 5th! Thats freaking junk, but correctable. It is because of my 20 inch tall baby slicks. Bigger slicks and I sould do 11's at over 120 with the lil 16g.

FMIC, stock motor/head, 3 inch ex., 660, AFC, 22psi

 

[myblack98gst]

nice!!!!


according to that I wasn;t doing too bad myself on the big 16g, I dont have a local 1/4 but my 1/8 mph was 88.9mph with it at 18psi on pump gas, and I have not spent ANY real wideband dyno time with it!

 

[coltboostin]

Hell, who needs a wideban, logger and a dream I say.

 

[hybridshooter]

slicks, but not really because they dont work well with my settup anymore. They were good when I was making no power, but I am now so its no good.

I could do no better than a 2.0 60ft, and that is bouncing off the rev limiter in 1st from spinning the slicks and spinning them 1/2 way through 2nd. They are only 6 inches wide, 20 tall.

Another setback is I was hitting the traps at 6700rpm according to my logger in 5th! Thats freaking junk, but correctable. It is because of my 20 inch tall baby slicks. Bigger slicks and I sould do 11's at over 120 with the lil 16g.

FMIC, stock motor/head, 3 inch ex., 660, AFC, 22psi

If your looking to get rid of those slicks, let me know. Depending on their condition and if they would bolt up to a 1g dsm I may be interested. PM if you want to see if maybe we could work something out.

 

[coltboostin]

PM'd ya