Exedy OEM Clutch Kit. Users chime in please.

[Artago]

Anyone run this clutch?

EXEDY OEM REPLACEMENT CLUTCH KIT: MITSUBISHI ECLIPSE 90-99 TURBO #22425

You must be logged in to view this image or video.

I need a cheap clutch kit for a stock 1G DSM (which I don't plan to upgrade). Just want to know if anyone has had any problems with this kit.

Thanks. Tom

 

[805DSM]

I've used it and it's the same as the one at Pepboys just relabeled as "luk clutch".. Works good as a stock replacement.

 

[WES_393]

I've used one with my first rebuild. Worked great. Slipped like a SOB at only 15psi, but otherwise worked just fine.

 

[Artago]

I've used it and it's the same as the one at Pepboys just relabeled as "luk clutch".. Works good as a stock replacement.

Thanks.

I've used one with my first rebuild. Worked great. Slipped like a SOB at only 15psi, but otherwise worked just fine.

On a hard launch like a quarter mile or just boosting around on the highway?

15PSI on a T25 or 14b?

Thanks. Tom

 

[Artago]

What TOB does it come with? Exedy or Mitsubishi?

If it was an Exedy TOB did you use it?

 

[LOLVTEC]

It doesnt come with oem.

 

[luv2rallye]

My Luk Clutch kit has Exedy parts (says right on the parts) and it had a piece of crap TOB. I didn't dare use it. The disk and PP were ok though for a stock kit.

 

[Artago]

Thanks bud. I will order a Mitsu TOB with the clutch. Tom

 

[ed1380]

I've used it and it's the same as the one at Pepboys just relabeled as "luk clutch".. Works good as a stock replacement.

Are you sure? Luk makes the oem clutches for vw

 

[805DSM]

Are you sure? Luk makes the oem clutches for vw

Yea, at least the Mitsubishi clutch kits and some nissans from "luk" are exedys.. I used to work at Pepboys.

 

[eligst21]

I'm running the exedy stage 1 on my gsx and at 270 hp, it has held up good and hasn't slipped. The only thing is I don't launch it much and drive fairly conservative. Although being a decent clutch and has held up ok, I would reccomend a different/better clutch. It is weird, the Clutch is still good, but my tranny is broke. Ha. My next clutch will be a clutch masters fx300.

 

[97awd-turbo]

bought the exedy oe replacement for my 2g gsx too. Do you think the TOB is that much of a matter if it's really just my dd? Thanks.

 

[WES_393]

On a hard launch like a quarter mile or just boosting around on the highway?

15PSI on a T25 or 14b?

Thanks. Tom

15psi on a 16g, pretty well tuned as well. I sonetimes experienced slipping right at full boost in 2nd, but mostly when taking tight turns at full throttle.This was with a freshly resurfaced flywheel.

I also agree with luv's post above. Both my stock Exedy and South Bend clutch came with that strange Exedy TOB. The best bet is to use a stock Mitsu TOB.