Evo III motor compared to 1g 4g63

[sheldon]

I've searched and havent found the info i was looking for. I want to know the specs between the two motors...the compression, the head, stock horsepower, any and all RELIABLE info that will help...I have an evo III motor and want to know....again if you dont know or you think or you hear DONT POST...FACTS PLEASE

Thanks dsmtuners.

 

[fourreGsixty3]

I found this in under 5 minutes, it just takes a little searching>>>http://www.carfolio.com/specifications/models/car/?car=75537&from=lp&Mitsubishi#engine
heres a 1G GSX>>>> http://www.carfolio.com/specifications/models/car/?car=12507&Mitsubishi
Hope it helps some,

Dustin

 

[JayRolla]

You can build a 1g motor just as good as an evo3. No reason to go all out trying to find one.

 

[phoenix_power]

Hey Guys,

A noob here. So, there are no difference between the Evo 1,2 and 3 cylinder block right?

Now, Im i correct to say that the Evo 1,2 & 3 crank is a 7 bolt and the VR4 crank is a 6 bolt? Or it's the other way round?

Which cylinder block/crankshaft to have and which cylinder head to have?


Sorry if it's a repost.


Many thanks.

 

[GVR4592]

A noob here. So, there are no difference between the Evo 1,2 and 3 cylinder block right?

Now, Im i correct to say that the Evo 1,2 & 3 crank is a 7 bolt and the VR4 crank is a 6 bolt?

That is correct.

 

[phoenix_power]

Now I'll all confused to which model type that suffers from crankwalk.

http://www.magnusmotorsports.com/tech/crankwalk.htm

2nd Gen is the Evo3 type of crank/block ie. 7 bolt?


So which block or combination(if any) does all the quick/high hp DSMs (e.g Shepracing,etc) uses?


Many thanks in advance.

 

[juukx]

They use the 6-bolt.

 

[dsmsucks]

The top speed on the lancer sucks??