sakroda
Proven Member
- 222
- 35
- May 3, 2016
-
İstanbul,
Europe
Hi guys
Finally I made my own firewall converter between my 1G and Evo 8 ECU.
My setup is
Stock Turbo and intercooler
Walbro 255
Evo 560cc injectors
Evo 8 399 MAF
AFPR I set at 3 bar but didn't help because my pump was screaming and AFR was crazy that is why I had to set it to 4 bar and everything was ok.
So Car is very stable than old DSM ECU's but I am not feeling more powerful car than with my old DSM ECU. Something went wrong or I don't know that's why I need your help.
My AFR is 14.7:1 at idle I didn't go down at WOT to 11.5:1
Is there a EPROM for my 90 Talon with this config? I can not see the rev on tachometer because of 90 PTU
I can give any information from Evoscan or something else I have Tactrix
thanks
Finally I made my own firewall converter between my 1G and Evo 8 ECU.
My setup is
Stock Turbo and intercooler
Walbro 255
Evo 560cc injectors
Evo 8 399 MAF
AFPR I set at 3 bar but didn't help because my pump was screaming and AFR was crazy that is why I had to set it to 4 bar and everything was ok.
So Car is very stable than old DSM ECU's but I am not feeling more powerful car than with my old DSM ECU. Something went wrong or I don't know that's why I need your help.
My AFR is 14.7:1 at idle I didn't go down at WOT to 11.5:1
Is there a EPROM for my 90 Talon with this config? I can not see the rev on tachometer because of 90 PTU
I can give any information from Evoscan or something else I have Tactrix
thanks
