EgoThief

[pieceofcloth]

I had it tuned from another laptop roughly 4 years ago. That laptop and this mac have the free download versions from their site.

I always thought the chip allowed me to use the program fully. So 125$ more

 

[pieceofcloth]

It looks like you have a 2G MAF, but your MAF comp is set for Stock. I think you can use global fuel adjustment to zero out the WOT parts of this graph.

I probably messed with it on accident.

You can also play with your global dead time (injector voltage offsets) to tune the idle/closed loop portions of the MAF comp.

i dont even know what any of those terms mean. Im not there yet.

View attachment 772139

Antilag is enabled - does it work for you? I've never figured this out.

I couldn't get the switch to activate so I just gave up. I could do the rev up thing but not rolling. I'll have to figure out this after I get this thing tuned.

View attachment 772140

I don't see a MAP sensor configured as an input pin assignment.

I'm not running a map or SD

View attachment 772141

Your DA tables have non-stock open loop thresholds configured. Is this temporary?

I dont know any of those terms. Iirc, maybe it was for a log. Again, we tuned it to idle, we cruise tuned or tried and belt came back soaked. Been fighting the leaks for 3 years.

View attachment 772142

And I noticed you have a large adjustment to your injector voltage adjust table. How did you come by these numbers?

I dont know anything about tuning. This was all remote as I adjusted accordingly.

 

[Justin DuBois]

I probably messed with it on accident.


i dont even know what any of those terms mean. Im not there yet.


I couldn't get the switch to activate so I just gave up. I could do the rev up thing but not rolling. I'll have to figure out this after I get this thing tuned.


I'm not running a map or SD


I dont know any of those terms. Iirc, maybe it was for a log. Again, we tuned it to idle, we cruise tuned or tried and belt came back soaked. Been fighting the leaks for 3 years.


I dont know anything about tuning. This was all remote as I adjusted accordingly.

No problem. You don’t “need” a map sensor to run with a MAF sensor, but it is the 1st most common sensor to add after the Wideband. When you are ready to start getting dialed in, we can help.