Driveshaft Bushings replace?

[DSM90AWD]

Is there a replacement (OEM or Aftermarket) for the (4) bushings on the driveshaft carrier bearing mounting brackets?

I'm overseas now so can't really call around at $3/min .. and would like to get these ordered before I return.

 

[DSM90AWD]

As an FYI.. Rockville Mitsu came thru for me.
The P/N is **removed as was wrong P/N** they go for $3.78 ea (from RM) $15.12 for all 4.

Judging from the condition of mine.. I'd bet 90% of the 1G AWD DSMs could use a new set.

 

[karbon]

Good luck on the install. It's a pain in the ass. The VFAQ for those is a great resource.

 

[DSM90AWD]

Good luck on the install. It's a pain in the ass. The VFAQ for those is a great resource.

You may be confused on the parts.. these are the 2-piece bushings that are inserted into the Carrier Bearing mounting holes. Can re/re these in 15mins.

 

[steve]

Mine were mush and got replaced when I did the spiders fast fall. Rockville had everthing I needed for that job too.

Steve

 

[DSM90AWD]

crap!
got the package from Rockville and they sent me a shim set (Spacer Set, Propeller Shaft)instead of the bushings that I'd asked for

If a mod reads this please remove the P/N I list in my previous post so as not to mis-inform anyone else.

In the meantime if anyone does have the correct P/N please let me know.

 

[DSM90AWD]

Should have updated this before, but the correct part numbers for the 3-piece driveshaft bushings are:

PNC# 31118 (MB505283) Insulator [Rubber Spacer]
PNC# 31119 (MB505284) Insulator [Rubber Spacer]
PNC# 31843 (MB505658) Spacer [Metal Insert]

Thanks to Bryan at Jerry's Mitsubishi