1G Coolant line help

[Shmylee]

Could someone take a look at this and help me with what lines go where? The steel braided line goes to my oil filter housing, the line coming from the oil housing is capped . The 2 coolant lines from the turbo, i don't know where they go. This is a 1G with a 2G head and intake, but everything connecting is 1G.
Thanks

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Anthony Hornback]

Do you have an N/T water pipe on there?

 

[Shmylee]

Don't think so.

You must be logged in to view this image or video.

 

[Anthony Hornback]

OK, the coolant drain goes the the water pipe and the feed is from the tstat
Coolant line diagram
Hope this helps

 

[pauleyman]

Don't think so.

You must be logged in to view this image or video.

Look on the bottom of the pipe. There is a fitting. This turbo coolant pipe is u shaped and goes under the turbo and connects with a banjo on the front side. If its an NT water pipe it will be smooth from the water pump until close to the end. No threaded bung on the underside.

 

[Shmylee]

Ok thanks, this is a turbo pipe then. As per the picture, I can see the threaded bung that you mention but in this picture, at the front of the picture you can see a cut hose that comes from the banjo pipe that you speak of. It no where near lines up to the bung. Also the capped pipe in the picture comes from my oil filter housing,, now I have a steel braided line that goes from the top of the turbo to oil filter housing,,,, do I need to connect that capped hose somewhere? Your help is appreciated, I'm close to finishing, just need to wait for my 1G turbo ecu from ECMtuning that's getting the ecmlink installed and finish these coolant lines.

 

[Anthony Hornback]

Steel braided is for oil.
That banjo is meant for stock turbo and placement. You can make a new line. Just look up the thread pitch of that banjo.
That capped pipe is a coolant like that goes to the water cooled oil cooler on your filter housing. It goes to one of the two ports you see here.
Are you using the cooler?

You must be logged in to view this image or video.

 

[Shmylee]

Yes, I'm trying to connect everything.