The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

chipped tooth on timing belt

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bigolsackapoo

10+ Year Contributor
79
0
Jun 8, 2008
indianapolis, Indiana
How catastrophic would it be if a tooth on the timing belt was chipped? Reason I ask is I know someone who this happened to. A bolt rattled off and hit the belt. They shut it off immediately. Are they going to have to rebuild the head you think?
 
Usually, one chipped tooth on a belt will not affect it. Chances are slim, but sh*t happens. Just replace it ASAP. May I recommend a Gates Belt combo? They are great and used on JGTC cars.
 
Where do you get gates belts from. My friend was going to look into a GReddy Kevlar belt. But I will recommend gates.
 
Fine choice of usernames, fatsackoshit.
A "chipped" belt tooth will reduce your grip on the crank sprocket by 1/12. A chip from a sprocket will rapidly spread its damage throughout the belt's teeth. Keep the sprockets and the belt spotlessly un-flawed.
 
replace the belt asap, and if hes getting the Greddy belt, thats better than the gates. but you can get the gates and orielly's and autozone and most other auto part stores. i personally use gates because there not to pricey and very reliable
 
Fine choice of usernames, fatsackoshit.
A "chipped" belt tooth will reduce your grip on the crank sprocket by 1/12. A chip from a sprocket will rapidly spread its damage throughout the belt's teeth. Keep the sprockets and the belt spotlessly un-flawed.
If you're wondering about my choice of username, it is my xbox live tag. :thumb:
 
the heads are Interference head, so you need to be careful with it,, i myself would not take guess and i would check the head and piston, but you have to pull the valve out to see if thay are bent, i had mark on my piston on 1 and 4 cylinder, but have bent valve on cylinder 3, it better to check and replace now then down the road,
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top