Car isn't running need help why it shuts off.

[DsmFausto]

I tried replacing the coilpack, spark plugs, wires, power transistor, ecu and camshaft postion sensor. But car still gives this code---
"P0340 Camshaft sensor position sensor A circuit Bank 1 or Single sensor"
The car will crank on and stay running for about 4 seconds then shut off.
I have no idea what it can be I've tried everything. I'd appreciate the help.

 

[jayson427]

sounds like a CAS problem you should check your voltage at your crank sensor or swap it for a known good one to see if it runs.

 

[DsmFausto]

The thing is, it use to not get spark at cylinders 2 and 3. Now that i replaced the Cam Sensor it does and misfires and acts up. How can i check voltage to crank sensor?

 

[99ECLIPSEGSXDSM]

Are the wires loose going to the cas? If so it won't read and act like you don't have one

 

[DsmFausto]

which wires exactly?

 

[jayson427]

http://www.dsmtuners.com/forums/bolt-tech/353714-95-gst-wont-start.html

in post number 3 it tells you how to check your cas. i didnt read the whole thread but you should and see if it gives other things to check.

 

[DsmFausto]

Thanks man i'll look into it.