Can I run with this setup

[91whiteGSX]

Ok I got a 91 gsx, I just took her all apart. Now I want to keep it most OEM and shes gonna be just a street girl . So im gonna run mostly stock but i do have a MHI small 16G FMIC full exhaust boost gauge o2 gauge . Now what I want to know is can I run my stock 6 bolt rods after they get done with EVO 9 piston... I have no way to tune. im gonna run like 12lbs or so im not sure of the timming or maping of the stock ECU will it run or no ???

 

[2gmummy]

I would definetly get atleast a safc II to tune with but your internals will be fine with a 16g

 

[crash89]

If your question is whether or not you can run 6bolt rods with evo pistons.. Yes! If your just going to run wastegate boost then youll be fine on the tuning side. Honestly Im still new to all that as well..

 

[92AWDHX40]

Tuning logger, wideband safc for fuel but you need to monitior knock and air, air fuel ratios basics of tuning good luck.

 

[rail king]

completely stock 6 or 7 bolts can handle the "abuse" from an mhi 16g, providing its tuned with the correct parts of couse

 

[91whiteGSX]

Sorry I should have been more clear im gonna get my parts from dsm grave. my rods with the evo 9pistons... Ok so I need a SFAC ll to run with these pistons cause im goimg from 7.8 1 to around 8.5 8.4 Oh yea another thing I forgot is when I got my car the guy had the 390cc injectors in it so I got a set of the black 450cc ... Now I was reading that I shouldnt use the 2g injectors in a 1g car because my fuel system is stock is this true or can I run them? Thanks guys for all the HELP!!!!