2G Cam identification help!

[ohlegend]

I definatly have a BC 272 exhaust cam, but my intake cam is marked HB 044 (the last 4 is upside down) and has a small F stamp at the CAS end. I can get pics of needed

 

[ohlegend]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

I pulled these from a motor I got from a junk yard. The exhaust cam is for sure a BC 272...i just can't find anything about this one. I checked the sprocket side to see if it was a regrind, but nothing was there

 

[Biddy420]

Let me check I’ve got bc 272’s

 

[Biddy420]

Only mark on my intake cam is bc0101n

 

[ohlegend]

Yeah the exhaust cam has BC 101 EX

 

[ohlegend]

Im hoping that the previous owner wasnt running a stock intake with a BC 272 exhaust...

 

[ohlegend]

I'm going to be borrowing a caliper this week but is there anyone out there who can tell me anything by the casting marks?

 

[ohlegend]

I need a little help from the cam gods.
I got some measurements last night and I was wondering if someone could help me with the math.
BC 0101 EX cam (known 272) Base Circle: 1.02 Lobe: 1.40
Unknown Intake Cam: Base circle: 1.02 Lobe: 1.39