Cam card needed for fp11r exhaust cam

[erikoberdorfer]

Hello,
I was wondering if anyone on here has the cam card for the fp11r exhaust cam that was once available thru Forced Performance. I have acquired one and would like some specs for degreeing purposes.

Thanks!

 

[erikoberdorfer]

All,
FP has placed all of their cam info on their website under "info center." Hopefully this will be useful to all of their customers. Thanks!

 

[Scoobystyl]

Look in my thread 1st post i have a link with the cam card
http://www.dsmtuners.com/forums/cylinder-head-short-block/466326-input-cams-too-big-okay.html

 

[JohnTSI]

That cam card you posted in your thread is not a fp5R/FP11 cam card unless they are different for a dsm. Here is the specs on mine.

Gross valve lift .475 I/.470 E
Cam lobe lift .276 I/.274 E
ADV. DUR. @ .004 278 I/306 E
Dur @ .050 232 I/260 E

As you can see that exhaust cam you posted is a baby compared to a 11r.

 

[Scoobystyl]

wow thats a big difference, well wtf i have the same cams as you i believe, are you a fan of them, maybe you could shed some light on my case

 

[JohnTSI]

Yes I like them, I would run something different in a street car, they sacrifice low end for top end power. I spin my car to 10-11k rpm depending on the gear. They where designed to be used with a very large turbo and big rpm.

 

[Scoobystyl]

So theres probably better options out there for me, im going to be running a auto long rod 2.4 with a bw s366