auto to 5speed conversion. clutch sensors

[DSM4me44]

I just got done installing my clutch pedal. I was wondering where I could connect the 2 sensors to that are on the pedal, since my car "was" automatic. I figure one or both are for the safety so you can't start your car in gear.

 

[luv2rallye]

Ya one is the clutch safety and you can just leave that one disconnected (if you really want this, connect one side to the starter relay's pin 1 green/black wire and the other to ground). The other is for cruise control disengage (black/red goes to auto-cruise ECU pin 1 and the other side of the switch (black) goes to both ground and auto-cruise ECU pin 14).

 

[DSM4me44]

awesome, thanks!