anyone tell me what cas this is..

[shifty2006]

I bought the car and was told its a 95 with 98 motor my computer is eprom im just trying to know how to put in my plug wires.. it has a harness that clips in and has three little connectors for the cas and the cas looks like this just need to know how to do the plug wires thanks..

 

[c2ypt1c]

2gb(97-99) cas

 

[shifty2006]

Is the oil here normal?

 

[c2ypt1c]

Is the oil here normal?

I don't think so, at least I don't remember mine leaking any oil...it's probably coming from that center bolt going into the cam.

 

[synthetek]

Its normal and to have oil in it, there's no o-ring like on a 1g cas.

Plug wires should be like on the right side in the pic.

You must be logged in to view this image or video.

 

[Twinturbo120]

I don't think so, at least I don't remember mine leaking any oil...it's probably coming from that center bolt going into the cam.

Oil on the inside is fine, thats why there is a gasket on the plate. So it won't leak oil.

 

[boost97gst]

Swap plug wires 3214 and click "non 95-96 cas" in dsm link. If you dont have link then some injector wiring swaps are in order i believe.

 

[shifty2006]

this all started because i washed the engine compartment being careful let it run 15 and then it wouldnt start the next day yes i covered intake and fuses but like a noob wasnt careful on the water on plugs ect. i pulled the wires off there was water in the plug holes so i had to take my truck so i wasnt late to work when i got home i couldnt remember how the wires went after i got all the water out of plug holes. i looked up what i thought it was and it would just crank no start started checking plugs but my cas has three pins on it and a harness and im pretty sure i put them back on in the correct order but at this point i put new plugs in but it runs really really rough if i start it i can keep it running if i turn it off and start it again it when it hits 3000 rpm it shuts off the cat got so hot when i kept it running that it was glowing red and smoking.. i put new plugs in and gapped them correctly its been probably a week now and its been in my garage with the heater on to try to dry everything out i have been hitting my head against the wall lost on this one especially since i did it to myself..

 

[shifty2006]

Broken wire on the cas pigtail.under the plastic heat sheilding.