Any DSM meets in San Diego

[banishedmunk]

we will get it corey dont worry we will both be driving to MOD

 

[dsmwonder]

God it's late and haven't post here in awhile but look what I just did.

You must be logged in to view this image or video.

ugly wabcam pic sorry but megasquirt ftw.

 

[Death_Carbon]

You and I are on the same page... I've got a lot of work to do and not a whole lot of time left before the 10th, I'm going to be pulling a few all nighters if I have to. I'll tow that bi*** up to MOD if it doesn't want to start, #### it.

Sounds exactly what ill be doing before the 10th. This is the plan as of right now. 98 gst will finally will be out of the body shop this Friday. (Almost 10 months there). If you have seen some pics of it you know the engine bay is completely gutted. I bought a nice 6 bolt block but started running low on funds and would like to build it right. I would really like to drive the car again so I bought a 95 gst with a 6 bolt block and somewhat decent mods so Friday I will be gutting the 95 and putting it in the 98. So if anyone wants some
interior or bodyparts I pretty much giving them away because unfortunately I do not have room for the shell and will be junking the car either sat or Sun.

 

[banishedmunk]

I bought a nice 6 bolt block but started running low on funds and would like to build it right

Is this the one you picked up from palmdale?

 

[gofer]

Sounds exactly what ill be doing before the 10th. This is the plan as of right now. 98 gst will finally will be out of the body shop this Friday. (Almost 10 months there). If you have seen some pics of it you know the engine bay is completely gutted. I bought a nice 6 bolt block but started running low on funds and would like to build it right. I would really like to drive the car again so I bought a 95 gst with a 6 bolt block and somewhat decent mods so Friday I will be gutting the 95 and putting it in the 98. So if anyone wants some
interior or bodyparts I pretty much giving them away because unfortunately I do not have room for the shell and will be junking the car either sat or Sun.

What colors the interior/exterior? I'm looking for a passenger side door in good dent free condition and also some interior odds and ends depending on the color of it.

 

[kimba1666]

Gofer I got my low settings down to 1k+30 2k+18 3k+9 4k and above to +8. But the High settings are pretty bad, I am maxed out at 4k and my o2 volts are below .82. Below I am at .91 with no knock. Maybe my injectors are bad or the fuel pump? I checked the afpr and it's good. Thanks for the help so far.

 

[Voxicles]

Sounds exactly what ill be doing before the 10th. This is the plan as of right now. 98 gst will finally will be out of the body shop this Friday. (Almost 10 months there). If you have seen some pics of it you know the engine bay is completely gutted. I bought a nice 6 bolt block but started running low on funds and would like to build it right. I would really like to drive the car again so I bought a 95 gst with a 6 bolt block and somewhat decent mods so Friday I will be gutting the 95 and putting it in the 98. So if anyone wants some
interior or bodyparts I pretty much giving them away because unfortunately I do not have room for the shell and will be junking the car either sat or Sun.

I need a hood (Someone in a truck backed over mine, and didn't leave a note), interior door panels, and side skirts

 

[Death_Carbon]

Is this the one you picked up from palmdale?

What colors the interior/exterior? I'm looking for a passenger side door in good dent free condition and also some interior odds and ends depending on the color of it.

Yup its the engine from palmdale. I decided I'm going take my time and get all the good parts for it and save money too. Also in a couple of months start looking for a AWD parts car to make the gst to gsx swap.

As for the 95 gst its black with grey leather interior. plastics inside are in good condition, rear seat leather is in perfect shape, the front seats are bad with rips and cracks. as for the body side skirts are missing but other then that just some some small scratches in the paint but no dents. I can post some pics latter.

 

[Voxicles]

Yup its the engine from palmdale. I decided I'm going take my time and get all the good parts for it and save money too. Also in a couple of months start looking for a AWD parts car to make the gst to gsx swap.

As for the 95 gst its black with grey leather interior. plastics inside are in good condition, rear seat leather is in perfect shape, the front seats are bad with rips and cracks. as for the body side skirts are missing but other then that just some some small scratches in the paint but no dents. I can post some pics latter.

If someone more important doesn't need it, could I possibly grab the drivers side door panel from you? Sounds like it's the same as mine. Whatever it is that holds the window and lock controls broke in mine :-( Sucks having to wiggle my finger inside to find the window control . If I wasn't so poor at the moment, I'd offer to buy the hood from you. I'm tired of the dent in mine

 

[sonik619]

Yea, call Ball Mitsubishi I hear they can install that kind of stuff no problem.

I rather buy a dsm that runs for the same money lewl.

 

[Death_Carbon]

If someone more important doesn't need it, could I possibly grab the drivers side door panel from you? Sounds like it's the same as mine. Whatever it is that holds the window and lock controls broke in mine :-( Sucks having to wiggle my finger inside to find the window control . If I wasn't so poor at the moment, I'd offer to buy the hood from you. I'm tired of the dent in mine

This Saturday afternoon whatever is left on the car is free. Like I said the car is getting junked so im not even asking for money. so you pull you keep.

right now this is the list of parts claimed.

I'm getting the engine and tranny all the way from the air intake to exhaust, tires and the tail lights. That is why I bought the car.

Another guy wants the brakes and rotors.

Voxicles if you want a hood I have 2 one white the other black. If you want the window control its yours just come get it this Saturday.

I'm doing this job at a buddy's house because I live in apartments. So I have this weekend only to do the swap. His women is barely letting me do this.

 

[Voxicles]

Yay! I'd like the black hood, maybe then I wouldn't have to paint it for a while I'll have to call around to see if I can borrow someones truck, I doubt I can fit the hood in the trunk of the talon

 

[Zefal151]

Hey all, been using the site for a long time, but just got a "new" spyder gst about 2-3 weeks ago, so decided to get more active in here

**Update: So been having an issue with my car, heres the post http://www.dsmtuners.com/forums/newbie-forum/373334-bogging-issues.html

was wondering if anyone was in or around the Northpark Area and willing to help a bit

 

[goodbuds]

i got my shit runing again..... ied ask were the meets are at but thats a stuped question.. between me an death carbon we got 4 dsm. jeje see you guys at mod

 

[banishedmunk]

sweet ed is going too we may have a decent little cruise going

 

[Voxicles]

Hey all, been using the site for a long time, but just got a "new" spyder gst about 2-3 weeks ago, so decided to get more active in here

**Update: So been having an issue with my car, heres the post http://www.dsmtuners.com/forums/newbie-forum/373334-bogging-issues.html

was wondering if anyone was in or around the Northpark Area and willing to help a bit

Lol, I was having almost the same problem, but at every speed... ended up being a torn UICP.

i got my shit runing again..... ied ask were the meets are at but thats a stuped question.. between me an death carbon we got 4 dsm. jeje see you guys at mod

I'd go, but I really don't trust my car through the desert on the way to vegas

 

[Death_Carbon]

I'd go, but I really don't trust my car through the desert on the way to vegas [/QUOTE]

Dude its in La.

Mitsubishi Motors - Owner's Day

 

[Voxicles]

I'd go, but I really don't trust my car through the desert on the way to vegas

Dude its in La.

Mitsubishi Motors - Owner's Day

Crap, why the hell did I think it was in Vegas? Hmm...

 

[goodbuds]

Lol, I was having almost the same problem, but at every speed... ended up being a torn UICP.


I'd go, but I really don't trust my car through the desert on the way to vegas

mod is not in vagas..jeje

 

[gofer]

Heres the plan for MOD'10, this is basically the tradition of my last two and I've got no complaints so hopefully we get a train of DSM's coming from the South this year...

5:15-5:30am - Meet at the AM/PM gas station just off the 5N on Carmel Valley Rd.

5:30am - Head North up the 5 to the 78E and meet up with the Oceanside crew at Denny's off of El Camino Real. We'll eat breakfast here, if you don't want breakfast waters free...

6:00am - Meet at Denny's in Oceanside off of El Camino Real, this is where we meet the Oceanside DSM'rs.

6:45-7:00am - Depending how many people show up, actually eat, or how fast our server is we'll be LEAVING Denny's around this time. If we get done eating at 6:38am then we'll hang out and B.S. in the parking lot until atleast 6:45am for the folks that don't want to eat or wake up late and miss the earlier times... 6:45am will be the earliest we leave Denny's though.

ARRIVE AT MOD around 8:00-8:15am depending on traffic...

July 10th Directions from San Diego to MOD

The link is for directions from start to finish A is the AMPM on Carmel Valley, hopefully your all familiar enough with San Diego to know how to get to the 5 and go North. If not print off directions or iPhone it... B is the location of the Denny's in Oceanside where we will be eating breakfast and meeting the Oceanside DSM'rs... C is the location of MOD so if any of us get seperated theres no reason for you to get lost on the way up there, here's the map. Once we get to Denny's and start meeting people I suggest giving someone your phone number because if your car breaks down you can call someone and get help/spare parts/etc.

Just copy, paste, & add your name to the the list that I've started below...

1. Corey (gofer)
2. Kris (banishedmunk)



I hope to see EVERYONE that posts on here at AM/PM or Denny's depending, this could be a big turn out if you show.

 

[Voxicles]

It's in between pay days for me If I happen across some monies, find a stock UICP, fix my valve cover leak and replace my hood, I'll be there

(Also gotta get my wheels balanced, I wobble terribly at 70 mph)

 

[Zefal151]

, id go but im actually about to leave for vegas right now... maybe next year

 

[goodbuds]

you guys want to meet up with the socal3g guy's?? they are gonna be heading that way an we could ride a little deeper?? they gonna be heading out about the same time an we could get the good parking . an free stuff if we get there early.. jeje

 

[Death_Carbon]

I'll show up at 0600 at Dennys in Oceanside if everything works out. My only concern is connecting the electrical back up. I'll be praying to the DSM gods that this engine swap goes smooth. with my luck it usually doesn't.

1. Corey (gofer)
2. Kris (banishedmunk)
3. Dustin (Death_Carbon)

 

[gofer]

It's in between pay days for me If I happen across some monies, find a stock UICP, fix my valve cover leak and replace my hood, I'll be there

(Also gotta get my wheels balanced, I wobble terribly at 70 mph)

$10 for a stock UICP, good luck with the hood though...

, id go but im actually about to leave for vegas right now... maybe next year

sucks man, your missing out.

you guys want to meet up with the socal3g guy's?? they are gonna be heading that way an we could ride a little deeper?? they gonna be heading out about the same time an we could get the good parking . an free stuff if we get there early.. jeje

Um FVCK NO. Sorry Ed but I hate 3g's, they are the cars that ruined the DSM reputation... We will be getting there early (8:00am) so we can get good parking with all the other DSM's NOT with all the riced out 3g's.

I'll show up at 0600 at Dennys in Oceanside if everything works out. My only concern is connecting the electrical back up. I'll be praying to the DSM gods that this engine swap goes smooth. with my luck it usually doesn't.

I'm shooting from the hip these next 8 days trying to get my car back on the road too, last person to get their car started has to by the other one breakfast at Denny's.